View Full Version : Onkyo tx-nr509
Weedhopper
05-02-2011, 04:45 AM
Hello
I am now trying to use ONKYO TX-NR509 with Mezzmo.
Now, I can play Music
But, when I select Video or Photo, lsg "connecting" is flashing for a short Time & nothing happend anymore (no list displayed)
ANy Suggestion will be welcomed.
Regards
JP
Hello,
Can you please send all logs (both folders) zipped to support (at) conceiva (dot) com and we'll investigate.
armstrn2
05-04-2011, 04:32 PM
I have had issues with my onkyo ( not your model ) before with sound dropouts, I had to send my unit off for a firmware update, you might be really lucky as your firmware is via USB - perhaps you should try an update ?
http://www.us.onkyo.com/model.cfm?m=TX-NR509&class=Receiver&p=d
Hope this helps
hartlenb
05-05-2011, 02:59 AM
I have the 708 and I don't believe it supports any streaming except music. Check your manual for DLNA and/or server playback. If it only references music files then that's all it will play.
armstrn2
05-05-2011, 03:49 AM
Yep - hartlenb is correct,
The DLNA is for Music only... I would suggest something a bit different..
http://www.amazon.co.uk/Samsung-BD-C5500-Blu-Ray-Player-Ready/dp/B003BYRPLE
this is a good price and the "Allshare" DLNA is pretty damn good - and as you will run the blue-ray through your amp it will perform well.
hartlenb
05-05-2011, 05:17 AM
I happen to have the BD-C5500. As stated works very well with Mezzmo.
randombox
08-24-2011, 05:53 AM
I own an Integra ('upscale' Onkyo) DHC-40.2 A/V preAmplifier/Processor.
This is supposed to be a DLNA hardware.
http://integrahometheater.com/model.cfm?m=DHC-40.2&class=Preamplifier&p=i#
The Mezzmo trial version I am using, configured itself to call-out my Integra DHC-40.2 as Onkyo TX.
The Integra DHC-40.2 is able to detect Mezzmo and handles the music files without a hitch.
However (and for some reason), it does not even enumerate the folder for movie files, like it does not even exist.
One of your previous advertisements referenced the Integra A/V hardware compatibility.
Are there "drivers" for this Integra DHC-40.2, that I can download somewhere?
Would you confirm whether the absence of the "Movie" folder is (as previously stated) due to possible DLNA compatibility with only Audion for the Integra/Onkyo models?
Similarly, are there any custom 'drivers' for the PatriotBoxOffice(http://www.patriotmemory.com/products/detailp.jsp?prodline=6&catid=69&prodgroupid=159&id=895&type=20) Media Player?
hartlenb
08-24-2011, 06:34 AM
I own an Integra ('upscale' Onkyo) DHC-40.2 A/V preAmplifier/Processor.
This is supposed to be a DLNA hardware.
http://integrahometheater.com/model.cfm?m=DHC-40.2&class=Preamplifier&p=i#...Does your manual say it's supports DLNA for anything other than audio? Onkyo doesn't (see prior posts in this thread).
As hartlenb said, it appears the device only supports music over DLNA (see pages 66-68 of the manual).
We don't have a device profile for the PBO, but try the "Xtreamer" device profile, as it appears to be similar in format support. Please let me know how that works out.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.