Mezzmo over Wireless to Panasonic Viera

[Cobolt]

Hi There,

I Have a Panasonic THP50U30Z TV and have been using Mezzmo on my XP machine quite well with a network cable. Unfortunately the cable needs to go across the hall in our house so I got a DY-WL10 wireless adapter for the TV and a Belkin N300 wireless router.

I have set them up and can see and access the WMP media server on the TV OK but while I can see the Mezzmo server, there is no logo and I can't access it.

I have checked the media devices in Mezzmo, the TV's adapter is set to auto and I have changed the connection type to Wireless N 600mps.

When I change back to the network cable now plugged into the wireless router, it works OK.

I have the Firewall set to ask for access permissions and nothing has come up, I've even turned the firewall off.

Any help would be greatly appreciated.

Cobolt

[Paul]

Please check this thread for some common connectivity issues: http://forum.conceiva.com/showthread.php/1183-FAQ-Cannot-see-Mezzmo-on-your-DLNA-device

If none apply or help, please enable logging (see this thread: http://forum.conceiva.com/showthread.php/419-FAQ-How-to-turn-on-diagnostic-logging) then turn your TV off and on and try to connect to Mezzmo. Once that fails, stop the server and send in the logs to support.

[Cobolt]

I've played around with the Mezzmo settings again and under Media Devices I checked the "Allow all new devices to connect to Mezzmo option." Walla!

Turns out the TV is detected as a separate device when connecting through Wireless. Who Knew.

Hopefully this may help someone else with a similar issue.

Thank you for your time Dennis.

[Paul]

Yes, it'll be a different device because wired and wireless networks will assign a different IP to it, so it'll look like a different device.