PDA

View Full Version : Constantly disconnected



jmmontoro
06-08-2012, 03:33 AM
On a Bravia KDL, after a few minutes of playback, the TV displays the message "The server is not accessible", either on the Mezzmo server or on the Windows 7 server.
I've tried different solutions, repairing the Mezzmo library, deleting the devices from the PC, from Mezzmo, from the TV.
This used to work fine a few days ago, don't know what's changed.

Paul
06-08-2012, 09:26 AM
If it worked a few days ago, then it suggests something may have changed on your PC or your home network. Also, you mention that you get the same 'disconnect' error for Mezzmo server and Windows media server, so that suggests that the problem is not with Mezzmo.

Try rebooting your router and see if that helps. If you recently upgraded the firmware on your router or your TV, then that may be the cause. Check your router settings. Or, if you recently installed a program on your PC, that may be the cause.

There is a checklist that helps diagnose problems with connecting and disconnecting - http://forum.conceiva.com/showthread.php/1183-FAQ-Cannot-see-Mezzmo-on-your-DLNA-device. Please go through each item and see if any apply to you situation.

Let us know how you go.

jmmontoro
07-07-2012, 07:17 AM
I locked the issue down to the router, replaced it and no issues at all, you can close, lock, trash, whatever.

Paul
07-09-2012, 03:04 PM
Thanks for letting us know.