Rolled back to 2.6.3 - All is good....

[mark11]

Hey Guys - I appreciate the awesome efforts to keep Mezzmo up to date but the 264 and 265 updates really caused me system slow downs or refusal to load media or announcing wrong codecs on multiple branded devices. I installed 263 and restored a set of Mezzmo dbs from pre-264. Everything is back to normal with 263.

Here is a short list o devices that were effected in some way.

Samsung BD-D6500
Samsung BD-C6500
Sony SMP-N100

Here is sample of the media I encode...

General
Unique ID : 166972299079132669334646906304922322807 (0x7D9DB1EFF9704CD867EDAE99E4730777)
Complete name : XXXXXXXXXXXXXXXX
Format : Matroska
Format version : Version 2
File size : 881 MiB
Duration : 28mn 21s
Overall bit rate : 4 345 Kbps
Writing application : HandBrake 0.9.6
Writing library : libmkv 0.6.5

Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High@L3.1
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 28mn 21s
Bit rate : 4 099 Kbps
Width : 720 pixels
Height : 496 pixels
Display aspect ratio : 4:3
Original display aspect ratio : 4:3
Frame rate mode : Variable
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.383
Stream size : 831 MiB (94%)
Writing library : x264 core 120
Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=6 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=2 / keyint=300 / keyint_min=30 / scenecut=40 / intra_refresh=0 / rc_lookahead=50 / rc=crf / mbtree=1 / crf=18.0 / qcomp=0.60 / qpmin=3 / qpmax=69 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00
Language : English
Default : Yes
Forced : No
Color primaries : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.601-6 525, BT.1358 525, BT.1700 NTSC, SMPTE 170M

Audio
ID : 2
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : A_AC3
Duration : 28mn 21s
Bit rate mode : Constant
Bit rate : 160 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 32.5 MiB (4%)
Language : English
Default : Yes
Forced : No

[Paul]

Thanks for reporting this & sorry for the problems. We have reproduced the problems you mention and fixed them. Several users already have these fixes and have confirmed the slow down & codec problems are fixed. We are preparing a minor update release for later this week for all registered users. You can either wait until the new release becomes available, or you can contact us now at support [at] conceiva [dot] com for the patch.

[mark11]

Thanks for reporting this & sorry for the problems. We have reproduced the problems you mention and fixed them. Several users already have these fixes and have confirmed the slow down & codec problems are fixed. We are preparing a minor update release for later this week for all registered users. You can either wait until the new release becomes available, or you can contact us now at support [at] conceiva [dot] com for the patch.

You guys are the best... I can wait. Thanks for the reply.

[Paul]

Just an update - Mezzmo v2.6.6 has just been released & your issues should be fixed. Please upgrade to this new version and try streaming again. Let us know how you go.