PDA

View Full Version : Mezzmo and LG PH590 television problem



mikeplow1961
06-12-2010, 11:44 PM
Hi

I downloaded Mezzmo to try with my new tv after experiencing problems with TVersity.

Upon first instal, the tv switched itself off as soon as it tried to connect to the media server. I contacted support who them gave me a patched file to try. This cured the problem and I could then navigate and select files on the tv.

Unfortunately, it then just gives a loading symbol on the screen for up to a minuteor so before the set displays a message that the device has been disconnected. This happens with transcoding enabled and disabled.

I enabled logging and repeated the procedure but the logfile is over 3MB in size and when zipped is still above the limit for forum attachment.

I'm going to email it to support in the hopes they can get it working with this range of tv sets which are selling widely here in the UK.

Paul
06-15-2010, 09:11 AM
Hi,

Thank you for the logs - I'll get back to you via e-mail regarding this issue. I'm sure we'll get the TV going properly.