Eurisko
12-18-2012, 09:06 AM
I have a large amount of MKV files. Whenever I stream any of them using Mezzmo, the end result is stereo audio being played on my receiver.
However, if I send it to a WD-TV Live directly, it works fine, and I get Digital Dolby 5.1 wonderfuly.
Any suggestions?
Here is my FFDShow output during the conversion:
ffmpeg version N-40693-gc457a29 Copyright (c) 2000-2012 the FFmpeg developers
built on May 15 2012 12:57:14 with gcc 4.6.2
configuration: --enable-memalign-hack --arch=x86 --target-os=mingw32 --cross-prefix=i686-w64-mingw32- --enable-static --disable-shared --enable-zlib --disable-postproc --prefix=/home/peter/ffmpeg/build/gpl --enable-libmp3lame --enable-libx264 --enable-gpl --extra-libs='-lx264 -lpthread' --enable-runtime-cpudetect --extra-cflags=-I/home/peter/cc/include --extra-ldflags=-L/home/peter/cc/lib --pkg-config=pkg-config --disable-w32threads
libavutil 51. 51.100 / 51. 51.100
libavcodec 54. 21.101 / 54. 21.101
libavformat 54. 5.100 / 54. 5.100
libavdevice 53. 4.100 / 53. 4.100
libavfilter 2. 73.100 / 2. 73.100
libswscale 2. 1.100 / 2. 1.100
libswresample 0. 11.100 / 0. 11.100
Input #0, matroska,webm, from 'M:\Video\Special\File.mkv:
Metadata:
creation_time : 2012-11-26 22:50:10
Duration: 00:43:12.16, start: 0.000000, bitrate: 5514 kb/s
Stream #0:0(eng): Video: h264 (High), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 2k tbc (default)
Stream #0:1(eng): Audio: ac3, 48000 Hz, 5.1(side), s16, 384 kb/s (default)
w:1920 h:1080 pixfmt:yuv420p tb:1/1000000 sar:1/1 sws_param:flags=2
[buffersink @ 03c1fc60] No opaque field provided
[yadif @ 03557560] mode:0 parity:-1 auto_enable:0
[scale @ 03af16a0] w:1920 h:1080 fmt:yuv420p sar:1/1 -> w:1280 h:720 fmt:yuv420p sar:1/1 flags:0x4
[B][ac3 @ 03566160] channel layout does not match number of channels
Guessed Channel Layout for Input Stream #0.1 : stereo
Output #0, asf, to 'N:\TranscodingFiles\73DBA4DC-58B6-4754-857D-D35FA5E058D4\Video\931-asf-wmv2-wmav2.mzt':
Metadata:
creation_time : 2012-11-26 22:50:10
WM/EncodingSettings: Lavf54.5.100
Stream #0:0(eng): Video: wmv2 (hq) (WMV2 / 0x32564D57), yuv420p, 1280x720 [SAR 1:1 DAR 16:9], q=2-31, 11000 kb/s, 1k tbn, 23.98 tbc (default)
Stream #0:1(eng): Audio: wmav2 (a[1][0][0] / 0x0161), 48000 Hz, stereo, s16, 127 kb/s (default)
Stream mapping:
Stream #0:0 -> #0:0 (h264 -> wmv2)
Stream #0:1 -> #0:1 (ac3 -> wmav2)
Press [q] to stop, [?] for help
Input stream #0:1 frame changed from rate:48000 fmt:s16 ch:6 chl:0x60f to rate:48000 fmt:s16 ch:2 chl:0x3
[h264 @ 03f1e0c0] Increasing reorder buffer to 1
I suspect the Bolded part about the channels is the issue, but how do you fix it?
Here is the properties of the file itself:
===================== General =====================
Format : Matroska
File size : 1.66 GB
Duration (ms) : 43mn 12s
Total bitrate : 5 515 Kbps
Encoded date : UTC 2012-11-26 22:50:10
Encoded application : mkvmerge v5.8.0 ('No Sleep / Pillow') built on Sep 2 2012 15:37:04
Encoded library : libebml v1.2.3 + libmatroska v1.3.0
===================== Video =====================
Id : 1
Format : AVC
Format info : Advanced Video Codec
Format profile : High@L4.0
Use of CABAC : Yes
RefFrames : 4 frames
Muxing mode : Container profile=Unknown@4.0
Codec Id : V_MPEG4/ISO/AVC
Duration (ms) : 43mn 12s
Bitrate mode : Variable
Bitrate : 5 021 Kbps
Width : 1 920 pixels
Height : 1 080 pixels
Aspect ratio : 16:9
Framerate : 23.976 fps
Colorimetry : YUV
Colos space : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.101
Stream size : 1.52 GB (91%)
Language : English
Color primaries : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
===================== Audio =====================
Id : 2
Format : AC-3
Format info : Audio Coding 3
Format settings mode extens : CM (complete main)
Codec Id : A_AC3
Duration (ms) : 43mn 12s
Bitrate mode : Constant
Bitrate : 384 Kbps
Channel(s) : 6 channels
ChannelPositions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 119 MB (7%)
Language : English
Thoughts? Suggestions? Ideas?
I just installed the trial, I was hoping to figure out if this would do what I want before my trial ends.
Thanks!
However, if I send it to a WD-TV Live directly, it works fine, and I get Digital Dolby 5.1 wonderfuly.
Any suggestions?
Here is my FFDShow output during the conversion:
ffmpeg version N-40693-gc457a29 Copyright (c) 2000-2012 the FFmpeg developers
built on May 15 2012 12:57:14 with gcc 4.6.2
configuration: --enable-memalign-hack --arch=x86 --target-os=mingw32 --cross-prefix=i686-w64-mingw32- --enable-static --disable-shared --enable-zlib --disable-postproc --prefix=/home/peter/ffmpeg/build/gpl --enable-libmp3lame --enable-libx264 --enable-gpl --extra-libs='-lx264 -lpthread' --enable-runtime-cpudetect --extra-cflags=-I/home/peter/cc/include --extra-ldflags=-L/home/peter/cc/lib --pkg-config=pkg-config --disable-w32threads
libavutil 51. 51.100 / 51. 51.100
libavcodec 54. 21.101 / 54. 21.101
libavformat 54. 5.100 / 54. 5.100
libavdevice 53. 4.100 / 53. 4.100
libavfilter 2. 73.100 / 2. 73.100
libswscale 2. 1.100 / 2. 1.100
libswresample 0. 11.100 / 0. 11.100
Input #0, matroska,webm, from 'M:\Video\Special\File.mkv:
Metadata:
creation_time : 2012-11-26 22:50:10
Duration: 00:43:12.16, start: 0.000000, bitrate: 5514 kb/s
Stream #0:0(eng): Video: h264 (High), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 2k tbc (default)
Stream #0:1(eng): Audio: ac3, 48000 Hz, 5.1(side), s16, 384 kb/s (default)
w:1920 h:1080 pixfmt:yuv420p tb:1/1000000 sar:1/1 sws_param:flags=2
[buffersink @ 03c1fc60] No opaque field provided
[yadif @ 03557560] mode:0 parity:-1 auto_enable:0
[scale @ 03af16a0] w:1920 h:1080 fmt:yuv420p sar:1/1 -> w:1280 h:720 fmt:yuv420p sar:1/1 flags:0x4
[B][ac3 @ 03566160] channel layout does not match number of channels
Guessed Channel Layout for Input Stream #0.1 : stereo
Output #0, asf, to 'N:\TranscodingFiles\73DBA4DC-58B6-4754-857D-D35FA5E058D4\Video\931-asf-wmv2-wmav2.mzt':
Metadata:
creation_time : 2012-11-26 22:50:10
WM/EncodingSettings: Lavf54.5.100
Stream #0:0(eng): Video: wmv2 (hq) (WMV2 / 0x32564D57), yuv420p, 1280x720 [SAR 1:1 DAR 16:9], q=2-31, 11000 kb/s, 1k tbn, 23.98 tbc (default)
Stream #0:1(eng): Audio: wmav2 (a[1][0][0] / 0x0161), 48000 Hz, stereo, s16, 127 kb/s (default)
Stream mapping:
Stream #0:0 -> #0:0 (h264 -> wmv2)
Stream #0:1 -> #0:1 (ac3 -> wmav2)
Press [q] to stop, [?] for help
Input stream #0:1 frame changed from rate:48000 fmt:s16 ch:6 chl:0x60f to rate:48000 fmt:s16 ch:2 chl:0x3
[h264 @ 03f1e0c0] Increasing reorder buffer to 1
I suspect the Bolded part about the channels is the issue, but how do you fix it?
Here is the properties of the file itself:
===================== General =====================
Format : Matroska
File size : 1.66 GB
Duration (ms) : 43mn 12s
Total bitrate : 5 515 Kbps
Encoded date : UTC 2012-11-26 22:50:10
Encoded application : mkvmerge v5.8.0 ('No Sleep / Pillow') built on Sep 2 2012 15:37:04
Encoded library : libebml v1.2.3 + libmatroska v1.3.0
===================== Video =====================
Id : 1
Format : AVC
Format info : Advanced Video Codec
Format profile : High@L4.0
Use of CABAC : Yes
RefFrames : 4 frames
Muxing mode : Container profile=Unknown@4.0
Codec Id : V_MPEG4/ISO/AVC
Duration (ms) : 43mn 12s
Bitrate mode : Variable
Bitrate : 5 021 Kbps
Width : 1 920 pixels
Height : 1 080 pixels
Aspect ratio : 16:9
Framerate : 23.976 fps
Colorimetry : YUV
Colos space : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.101
Stream size : 1.52 GB (91%)
Language : English
Color primaries : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
===================== Audio =====================
Id : 2
Format : AC-3
Format info : Audio Coding 3
Format settings mode extens : CM (complete main)
Codec Id : A_AC3
Duration (ms) : 43mn 12s
Bitrate mode : Constant
Bitrate : 384 Kbps
Channel(s) : 6 channels
ChannelPositions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 119 MB (7%)
Language : English
Thoughts? Suggestions? Ideas?
I just installed the trial, I was hoping to figure out if this would do what I want before my trial ends.
Thanks!