epocas
01-18-2014, 10:57 PM
Dear all,
I'm experiencing some problems streaming some MKV files to my Samsung HT-C5500 Home Cinema.
The profile for the media device is "Samsung C"
When I try to play them it shows a black screen for about 10 seconds and then it displays the message: "File not supported".
If I pre-transcode the movie, it will show, but this solution is not convenient for me as I don't know wich files will not play to pre-transcode them beforehand.
Below is the FFMpeg information for two files that are not streaming, the first one I've already transcoded and it works, the second one is transcoding now...
What can I do for these files to be streamed automatically as the remaining ones in my library?
Best regards
Eduardo Poças
---------------------FILE #1-------------------------------
ffmpeg version N-50460-g393dcbf Copyright (c) 2000-2013 the FFmpeg developers
built on Jun 27 2013 17:20:20 with gcc 4.6.2 (GCC)
configuration: --enable-memalign-hack --arch=x86_64 --target-os=mingw32 --cross-prefix=x86_64-w64-mingw32- --enable-static --disable-shared --enable-zlib --disable-postproc --prefix=/home/peter/ffmpeg/build/gpl64 --enable-libmp3lame --enable-libx264 --enable-gpl --extra-libs='-lx264 -lpthread' --enable-runtime-cpudetect --extra-cflags=-I/home/peter/cc64/include --extra-ldflags=-L/home/peter/cc64/lib --pkg-config=pkg-config --disable-w32threads --enable-zlib
libavutil 52. 17.103 / 52. 17.103
libavcodec 54. 92.100 / 54. 92.100
libavformat 54. 63.102 / 54. 63.102
libavdevice 54. 3.103 / 54. 3.103
libavfilter 3. 41.100 / 3. 41.100
libswscale 2. 2.100 / 2. 2.100
libswresample 0. 17.102 / 0. 17.102
Input #0, matroska,webm, from 'D:\Media\Series\Arrow\Season 01\Arrow.S01E13.Betrayal.1080p.WEB-DL.DD5.1.H.264-TB.mkv':
Metadata:
title : Arrow S01E13
creation_time : 2013-02-07 16:36:03
Duration: 00:42:21.95, start: 0.000000, bitrate: 5353 kb/s
Stream #0:0(eng): Video: h264 (High), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 2k tbc (default)
Stream #0:1(eng): Audio: ac3, 48000 Hz, 5.1(side), fltp, 384 kb/s (default)
At least one output file must be specified
<MEZZMO>: Child process ended with code: 109, ExitCode=1
---> DB Level Info: 40, 100
---> Frame rate: 23,98
---> Aspect ratio: 16:9 PAR=1:1
---------------------FILE #2-------------------------------
ffmpeg version N-50460-g393dcbf Copyright (c) 2000-2013 the FFmpeg developers
built on Jun 27 2013 17:20:20 with gcc 4.6.2 (GCC)
configuration: --enable-memalign-hack --arch=x86_64 --target-os=mingw32 --cross-prefix=x86_64-w64-mingw32- --enable-static --disable-shared --enable-zlib --disable-postproc --prefix=/home/peter/ffmpeg/build/gpl64 --enable-libmp3lame --enable-libx264 --enable-gpl --extra-libs='-lx264 -lpthread' --enable-runtime-cpudetect --extra-cflags=-I/home/peter/cc64/include --extra-ldflags=-L/home/peter/cc64/lib --pkg-config=pkg-config --disable-w32threads --enable-zlib
libavutil 52. 17.103 / 52. 17.103
libavcodec 54. 92.100 / 54. 92.100
libavformat 54. 63.102 / 54. 63.102
libavdevice 54. 3.103 / 54. 3.103
libavfilter 3. 41.100 / 3. 41.100
libswscale 2. 2.100 / 2. 2.100
libswresample 0. 17.102 / 0. 17.102
Input #0, matroska,webm, from 'D:\Media\Downloads\Escape.Plan.2013.1080p.HDTV.x2 64-KingStoner\Escape.Plan.2013.1080p.HDTV.x264-KingStoner.mkv':
Metadata:
creation_time : 1970-01-01 00:00:02
Duration: 01:50:40.82, start: 0.000000, bitrate: 4676 kb/s
Stream #0:0(eng): Audio: aac, 48000 Hz, stereo, fltp (default)
Stream #0:1(eng): Video: h264 (High), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], 25 fps, 25 tbr, 1k tbn, 50 tbc (default)
At least one output file must be specified
<MEZZMO>: Child process ended with code: 109, ExitCode=1
---> DB Level Info: 40, 100
---> Frame rate: 25,00
---> Aspect ratio: 16:9 PAR=1:1
I'm experiencing some problems streaming some MKV files to my Samsung HT-C5500 Home Cinema.
The profile for the media device is "Samsung C"
When I try to play them it shows a black screen for about 10 seconds and then it displays the message: "File not supported".
If I pre-transcode the movie, it will show, but this solution is not convenient for me as I don't know wich files will not play to pre-transcode them beforehand.
Below is the FFMpeg information for two files that are not streaming, the first one I've already transcoded and it works, the second one is transcoding now...
What can I do for these files to be streamed automatically as the remaining ones in my library?
Best regards
Eduardo Poças
---------------------FILE #1-------------------------------
ffmpeg version N-50460-g393dcbf Copyright (c) 2000-2013 the FFmpeg developers
built on Jun 27 2013 17:20:20 with gcc 4.6.2 (GCC)
configuration: --enable-memalign-hack --arch=x86_64 --target-os=mingw32 --cross-prefix=x86_64-w64-mingw32- --enable-static --disable-shared --enable-zlib --disable-postproc --prefix=/home/peter/ffmpeg/build/gpl64 --enable-libmp3lame --enable-libx264 --enable-gpl --extra-libs='-lx264 -lpthread' --enable-runtime-cpudetect --extra-cflags=-I/home/peter/cc64/include --extra-ldflags=-L/home/peter/cc64/lib --pkg-config=pkg-config --disable-w32threads --enable-zlib
libavutil 52. 17.103 / 52. 17.103
libavcodec 54. 92.100 / 54. 92.100
libavformat 54. 63.102 / 54. 63.102
libavdevice 54. 3.103 / 54. 3.103
libavfilter 3. 41.100 / 3. 41.100
libswscale 2. 2.100 / 2. 2.100
libswresample 0. 17.102 / 0. 17.102
Input #0, matroska,webm, from 'D:\Media\Series\Arrow\Season 01\Arrow.S01E13.Betrayal.1080p.WEB-DL.DD5.1.H.264-TB.mkv':
Metadata:
title : Arrow S01E13
creation_time : 2013-02-07 16:36:03
Duration: 00:42:21.95, start: 0.000000, bitrate: 5353 kb/s
Stream #0:0(eng): Video: h264 (High), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 2k tbc (default)
Stream #0:1(eng): Audio: ac3, 48000 Hz, 5.1(side), fltp, 384 kb/s (default)
At least one output file must be specified
<MEZZMO>: Child process ended with code: 109, ExitCode=1
---> DB Level Info: 40, 100
---> Frame rate: 23,98
---> Aspect ratio: 16:9 PAR=1:1
---------------------FILE #2-------------------------------
ffmpeg version N-50460-g393dcbf Copyright (c) 2000-2013 the FFmpeg developers
built on Jun 27 2013 17:20:20 with gcc 4.6.2 (GCC)
configuration: --enable-memalign-hack --arch=x86_64 --target-os=mingw32 --cross-prefix=x86_64-w64-mingw32- --enable-static --disable-shared --enable-zlib --disable-postproc --prefix=/home/peter/ffmpeg/build/gpl64 --enable-libmp3lame --enable-libx264 --enable-gpl --extra-libs='-lx264 -lpthread' --enable-runtime-cpudetect --extra-cflags=-I/home/peter/cc64/include --extra-ldflags=-L/home/peter/cc64/lib --pkg-config=pkg-config --disable-w32threads --enable-zlib
libavutil 52. 17.103 / 52. 17.103
libavcodec 54. 92.100 / 54. 92.100
libavformat 54. 63.102 / 54. 63.102
libavdevice 54. 3.103 / 54. 3.103
libavfilter 3. 41.100 / 3. 41.100
libswscale 2. 2.100 / 2. 2.100
libswresample 0. 17.102 / 0. 17.102
Input #0, matroska,webm, from 'D:\Media\Downloads\Escape.Plan.2013.1080p.HDTV.x2 64-KingStoner\Escape.Plan.2013.1080p.HDTV.x264-KingStoner.mkv':
Metadata:
creation_time : 1970-01-01 00:00:02
Duration: 01:50:40.82, start: 0.000000, bitrate: 4676 kb/s
Stream #0:0(eng): Audio: aac, 48000 Hz, stereo, fltp (default)
Stream #0:1(eng): Video: h264 (High), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], 25 fps, 25 tbr, 1k tbn, 50 tbc (default)
At least one output file must be specified
<MEZZMO>: Child process ended with code: 109, ExitCode=1
---> DB Level Info: 40, 100
---> Frame rate: 25,00
---> Aspect ratio: 16:9 PAR=1:1