PDA

View Full Version : Stoppages and many other problems raspberry pi



alkon
04-01-2014, 03:07 AM
Hello!

I just found your program and promises much, but I have some problems.

I have this configuration

Mezzmo Server 2500 I5, 4 ​​Gb DDR3.

network: PLC to 270Mbs, checked

customers:

Raspberry Pi with Raspbmc (XBMC) - NO plays content

Sony Bluray Player BDP 790 - Play content but halts and cuts. NOT be played fluently

LG TV LA667-Play content but halts and cuts. NOT be played fluently


Well, these are the problems I have with the devices.

I could help?

thanks ^ ^

smitbret
04-01-2014, 06:15 AM
Hello!

I just found your program and promises much, but I have some problems.

I have this configuration

Mezzmo Server 2500 I5, 4 ​​Gb DDR3.

network: PLC to 270Mbs, checked

customers:

Raspberry Pi with Raspbmc (XBMC) - NO plays content

Sony Bluray Player BDP 790 - Play content but halts and cuts. NOT be played fluently

LG TV LA667-Play content but halts and cuts. NOT be played fluently


Well, these are the problems I have with the devices.

I could help?

thanks ^ ^

It really sounds like you have some issues with your wireless network.

When you say that the RaspberryPi won't play content, is it seeing your Mezzmo library? If so, at what point does it stop functioning properly?

alkon
04-01-2014, 05:23 PM
Hello

I have wired network using PCL. Whereupon it is not normal to cut my connections

I've got the raspberry Middle solved, in selecting the XBMC profiles

What I have to solve other problems are the cuts to other clients

smitbret
04-01-2014, 10:42 PM
Hello

I have wired network using PCL. Whereupon it is not normal to cut my connections

I've got the raspberry Middle solved, in selecting the XBMC profiles

What I have to solve other problems are the cuts to other clients

If you are certain that you have the correct profiles selected for each device, it sounds like the device that is storing/streaming the media is having some issues transcoding.

If you are certain that you've selected the correct device profiles, try streaming something to one of your devices. While it is attempting playback, open up Mezzmo and click the "Transcoding" tab near the the bottom right. It will tell you if the file is being transcoded. If the message in the window is in RED and/or the fps isn't higher than 30 then it would seem that your CPU in the streaming PC isn't powerful enough to stream on the fly.

If this is the case you'll need to get a more powerful CPU or pre-transcode your movies.