PDA

View Full Version : Mezzmo 4.0.5.0 dosnīt work well



paladin
07-11-2014, 03:31 AM
Hello,

I have a problem with the new version of mezzmo. After the update from 3.4.4.0 to 4.0.5.0 all is shit!
My pioneer bluray player dosnīt work with DLNA. My philips tv works, but not well! Whats up with the new Version?
I donīt changed anything on my comouter system: Win7 x64, 16GB RAM,128GB SSD and 3TB HDD, Intel i7 3770, Asus Mainboard.
Is there anyone who can help me?
Thanks in advance

TimC
07-11-2014, 06:50 AM
Have you checked that all the device profiles has been correctly assigned?

I noticed when going to 4.0.3.0 that some of mine needed correcting.

paladin
07-11-2014, 07:42 AM
Yes, I have checked all devices and there correctly assignded. So, with the version 3.x.x.x all was fine. I have tested the following: I have deinstalled mezzmo and installed the new version clean. The same result:-(

Paul
07-11-2014, 08:30 AM
Sorry for the problems. We'll get you back up and running ASAP. First step, make sure you are running the latest version (v4.0.6.0). Next, turn on logging (see http://forum.conceiva.com/showthread.php/419-FAQ-How-to-turn-on-diagnostic-logging) and restart your Mezzmo server. Now connect to Mezzmo server from your Pioneer Blu-ray player and reproduce the problem you are having. Then stop your Mezzmo server and exit Mezzmo. Zip up all the logs and email them to us at support [at] conceiva [dot] com.

paladin
07-16-2014, 03:47 AM
Ok, Iīm going to do that. But there is yet another thing to. The start time is very long in between to the older version v3.xxx. The v3.xx takes less than 2 seconds to run, the v4.xxx takes lot more time. Why? Thats not good :-(

Paul
07-16-2014, 09:05 AM
Understand. If you email us a set of logs (as per my previous post), we may know why Mezzmo is taking so long to start on your computer. After turning on logging, exit the Mezzmo Windows app and start it again. Then wait until is starts up. When it is finally running, then exit Mezzmo app again and zip up all the logs and email them to us at support [at] conceiva [dot] com.

paladin
08-23-2014, 10:10 PM
Now with the version 4.0.6.0 my pioneer bluray works fine. But the start time is not well:-(
Iīve send my log to the support right now.

Paul
08-25-2014, 08:54 AM
Thanks - we'll analyse your logs and report back via email.