PDA

View Full Version : stammering



VFOX
12-02-2015, 07:42 PM
I am the owner of TV LG 42LF650V
I bought you Muzmo.
Install it on my computer: I7 4770K, 16 GB of memory.
TV connected to the LAN via a wired connection.
The transfer takes place normally on the TV almost all movies, except for some :)
If the bit rate exceeds 12-13 megabits per second, the video playback in some moments is accompanied by delays (stuttering).
I think that it depends on the device. I choose the LG 2014
If I perform transcoding of the film with a decrease in bitrate by moving the slider on the screen, the situation is getting better.
But if I choose as a device, for example, Sony Play Station 3 with a resolution of 1920 * 1080, the delay disappears.
In this regard I have two questions for you:
1. If you .PRF file for LG TV 2015?
2. If not, is it possible to find somewhere to describe this XML (.PRF) file

Mes meilleurs sentilents

Paul
12-03-2015, 09:00 AM
We can create an LG TV 2015 device profile. We will need two things from you:


A set of logs. Turn on logging in Mezzmo (see http://forum.conceiva.com/showthread.php/419-FAQ-How-to-turn-on-diagnostic-logging) and restart your Mezzmo server. Connect to Mezzmo server from your TV and browse some playlists and play a few files. Then stop your Mezzmo server and exit Mezzmo (Windows) app. Zip up all the logs.
A list of supported media formats that your TV supports – including video formats, music formats, photo formats and subtitle formats. You should find this in your TV manual or on the LG web site.

Email all information to us at support [at] conceiva [dot] com.

VFOX
12-08-2015, 08:42 PM
Thank you for the quick help.
The Profile you sent me is OK, my TV identified the media server.
Stuttering has disappeared, but ...
Every 10 - 15 minutes the video picture on TV screen is freezing following by spinning colored balls.
After 20-30 seconds the movie continues to play.
At this moment the monitor performance of Windows 10 with installed Mezhzmo server shows zero traffic, with or without
transcoding
What would you advise me?

Paul
12-09-2015, 08:28 AM
Glad we are making some progress. It's best we see a set of logs when this freezing is taking place. Turn on logging in Mezzmo (see http://forum.conceiva.com/showthread.php/419-FAQ-How-to-turn-on-diagnostic-logging) and restart your Mezzmo server. Now reproduce the freezing on your TV when streaming a video from Mezzmo server. Once reproduced, stop your Mezzmo server and exit Mezzmo (Windows) app. Zip up all the logs and email them to us at support [at] conceiva [dot] com. Also, in your email, include the FFmpeg information for the video that you streamed to your TV. To get this, right-click on the video in Mezzmo and click 'Get FFmpeg Information'.

VFOX
12-13-2015, 07:54 PM
Dear sir
I’ve encountered problems using pre-transcoded Blu-ray file with a Mezzmo media-server.
File details:
ffmpeg version N-66094-gbb8b752 Copyright (c) 2000-2014 the FFmpeg developers
built on Sep 4 2014 16:23:51 with gcc 4.8.2 (GCC)
configuration: --enable-memalign-hack --arch=x86_64 --target-os=mingw32 --cross-prefix=x86_64-w64-mingw32- --enable-static --disable-shared --enable-zlib --disable-postproc --prefix=/home/peter/ffmpeg/build/gpl64 --enable-libmp3lame --enable-libx264 --enable-gpl --extra-libs='-lx264 -lpthread' --enable-runtime-cpudetect --extra-cflags=-I/home/peter/cc32/include --extra-ldflags=-L/home/peter/cc64/lib --pkg-config=pkg-config --disable-w32threads --enable-libvpx --enable-libvorbis
libavutil 54. 7.100 / 54. 7.100
libavcodec 56. 1.100 / 56. 1.100
libavformat 56. 4.100 / 56. 4.100
libavdevice 56. 0.100 / 56. 0.100
libavfilter 5. 0.103 / 5. 0.103
libswscale 3. 0.100 / 3. 0.100
libswresample 1. 1.100 / 1. 1.100
Input #0, mpegts, from 'pipe:':
Duration: N/A, start: 600.000000, bitrate: 3072 kb/s
Program 1
Stream #0:0[0x1011]: Video: h264 (High) (HDMV / 0x564D4448), yuv420p(tv, bt709), 1920x1080 [SAR 1:1 DAR 16:9], 25 fps, 25 tbr, 90k tbn, 50 tbc
Stream #0:1[0x1100]: Audio: dts (DTS-HD MA) ([134][0][0][0] / 0x0086), 48000 Hz, stereo, fltp, 1536 kb/s
Stream #0:2[0x1101]: Audio: dts (DTS-HD MA) ([134][0][0][0] / 0x0086), 48000 Hz, 5.1(side), fltp, 1536 kb/s
At least one output file must be specified

<MEZZMO>: Child process ended with code: 109, ExitCode=1


---> DB Level Info: 41, 100
---> Frame rate: 25,00
---> Aspect ratio: 16:9 PAR=1:1
---> Duration: 02:19:22
---> Pipe: E:\ВИДЕО2\MYLENE FARMER\2009 - STADE DE FRANCE\BDMV\STREAM\00000.m2ts

Using a profile that you sent me for my TV (LGTV2015.prf) I’ve transcoded file (Image4) in mpeg.
By the way, TV does not support .asf. So why is it included in the profile?
In the file properties I’ve set .mpeg as preferred format.
Then I turn on the TV, connect to the media server and begin to play the movie and this is what happens:
Instead of using my pre-transcoding file (Image3), a new transcoding in matroska format begins.
After a while mezzmo writes in the transcoding-status, that he doesn’t have enough time, which is fair, because the file is very large for real-time transcoding, which is exactly the reason why I was pre-transcoding it.
In the Windows Performance Monitor I see that the original file is used instead of pre-transcoded one. (Image2).
I sent a letter to the log

Yours respectfully, Aleksey Klimov

Paul
12-14-2015, 11:26 AM
Thanks for the information. We've emailed you with a patch to try.

According to LG's online manual, your TV model does support WMV/ASF video. See http://kr.eguide.lgappstv.com/manual/w15_mr/dvb/Apps/w15_mr_e01/e_eng/share.html.

VFOX
12-14-2015, 05:11 PM
Merci beaucoup
I check evening
Where can we sign up for beta testing verson 5.0?

Smile
12-15-2015, 08:16 AM
Merci beaucoup
I check evening
Where can we sign up for beta testing verson 5.0?


Greetings,

Paul has told us that they are "trying" to get it out before Christmas. However, they will not release it before they have it stable enough for use. So... Long story short. Just keep checking back daily for the announcement. You can also see the announcement on the Facebook page located here: https://www.facebook.com/Mezzmo.DLNA.Server

VFOX
12-15-2015, 10:49 PM
Everything worked!
The problem was that the original file in the folder with the name in Cyrillic!
(---> Pipe: E:\ВИДЕО2\MYLENE FARMER\2009 - STADE DE FRANCE\BDMV\STREAM\00000.m2ts )
After transferring the file to a folder ONLY English characters I transcoded file again and WOW ! On TV broadcast was the transcoded file!
It seems to me that this is a bug program?

Paul
12-16-2015, 08:49 AM
Well done on troubleshooting the problem! We'll reproduce your problem here and fix it for the upcoming Mezzmo v5.0. Glad you are now up and running now :).