PDA

View Full Version : Samsung UN32J5500 Hook Up



gblss
07-20-2018, 06:00 AM
New to product and new to the forum hope this is easy question. Install Mezzmo 5.2.0.0 on windows 7 server and installed mezzmo app on above mentioned TV. When I launch the app on the TV it just trys to connect showing moving dots and ten just goes away and never connects. All installs seems to go fine. Also does not show up on TV under MY Content either. Any ideas as what to look for? Thanks.

Peter
07-20-2018, 08:50 AM
Hi,
it is likely your firewall is blocking communication between the TV and the PC, try going to 'Media Server Settings' in Mezzmo and click the button to configure the firewall if it is enabled and you use the Windows Firewall. If you use a different firewall you will need to make sure MezzmoMediaServer.exe is allowed full access through the firewall so that multicast messages on port 1900 can be sent and received.

gblss
07-21-2018, 01:44 AM
Thank you for your reply. The windows firewall is greyed out and I already checked that the firewall was letting Mezzmo thru. I will check some things and post my findings or continued problem.