mrgenie
09-20-2019, 02:56 AM
1st issue:
EDIT 2: the error comes back again. Sometime it plays as it should and sometimes I see the: "sorry, this video can not be player" the same video that
was played just a minute ago!!
When I click "back" on the remote while playing a movie (being transcoded)..
after that trying to play the movie again and I get this error.
if I delete transcoded files, restart mezzmo server and then play the file again it works again.
I hit the "back" button just once... and I can never play this video anymore. I have to use remote desktop, login to server, delete transcoded files, restart mezzmo and then I can play again
This is kinda frustrating not being able to play a movie and WATCH OUT not to hit the back button because that's going to screw you.
EDIT 3: so if transcoding a file it's buffering a while (10 seconds) and starts playing the transcoded file
If the transcoding is fast enough, you can continue watching
As mentioned above, hitting the "back" button on the remote kills your viewing experience and you have to start from scratch
BUT ALSO: if the transcoding isn't fast enough, in my case the 10 seconds prebuffering is enough for 2-3 minutes watching and then the transcoding isn't fast enough the
playback of the movie is simply "cut-off" like you hit the "back" button back to the main mezzmo app screen.
Guess what? Same as when hitting the "back" button you can not use this file anymore and have to login on the remote desktop to the server, stop the transcoding, delete
transcoded files, restart mezzmo server..
So the "back" button issue needs to be fixed. probably nothing to do with the back button at all, as the same behavior happens when transcoding not fast enough.
Aside from the "back" button issue, also the issue that the app simply QUITS the player if transcoding isn't fast enough... instead it should just do the "buffering" again
for another 10 seconds to continue another 2-3 minutes
EDIT 4: also if you start playing a movie. Transcode kicks in... friend visits you shortly for 15 minutes so you stop the tv.
After 15 minutes you wanna continue watching so you switch on the tv and klick the movie to be played again..
transcoding is still going on
you again get the message: "sorry, this video can not be played"
I assume the problem with ALL these issues is that maybe because the file isn't filly transcoded yet?
So if playing WHILE being transcoded and not stopping you catch the stream in your app. but if there's any cut off during the transcoding, maybe you must wait for the 100% file complettion?
If that's the case, it has to be changed because it's really sad to wait so long..
__________________________________________________ __________________________________________________ ________________________________________________
I leave 2nd and 3rd issue in place, for reference purposes.
2nd issue:
Found it: lower right change SW to HW fixes this behavior.
when playing 4k movies in the mezzmo app Android TV there's a slight lag/stuttering which is quite annoying (without transcoding selection as with the transcoding it simply refuses to play now)
When I select the mezzmo app NOT to use the mezzo player but using the default player, kodi player, vlc player there's absolutely perfect fluent playback of that file from
the mezzmo server!
So I think there's a noticeable performance bug to the app. If all the other players can playback fluent without any stuttering from the mezzmo DLNA server..
then the mezzmo own player should be able to do that as well IMHO
__________________________________________________ __________________________________________________ ________________________________________________
3rd issue:
EDIT never mind this issue below, driver issue from nvidia. Installing the right (an older!!) driver fixes it. (just keep it here in the post might be helpful for others to know you accidentally might go for
an older driver, even if the error says you need minimum version xxx.xx
I figured out AFTER I bought a Sony that Sony doesn't support subtitles over DLNA in any form. Neither external nor inside an MKV or whatever other possible scenario.
Thankfully we have Mezzmo that can transcode things on the fly.
BUT without the transcoding all the videos are being played by the Sony
if I enable the transcoding on some files I get the message: "sorry, this video can not be played"
EDIT: well first it did the transcoding, I found out, but then it stopped doing transcoding and even files it worked for before are now getting this error for some weird reason.
For ALL the files I use the SAME transcoding in Handbrake
every single Bluray, DVD, VHS, or digital format I ever bought I ALWAYS use the same transcoding in handbrake
before adding it to my local data-storage
so again: if I disable transcoding for these files they can be played, just no subtitles
if in Mezzmo I enable the transcoding, it worked at first and all of the sudden it didn't
EDIT 2: the error comes back again. Sometime it plays as it should and sometimes I see the: "sorry, this video can not be player" the same video that
was played just a minute ago!!
When I click "back" on the remote while playing a movie (being transcoded)..
after that trying to play the movie again and I get this error.
if I delete transcoded files, restart mezzmo server and then play the file again it works again.
I hit the "back" button just once... and I can never play this video anymore. I have to use remote desktop, login to server, delete transcoded files, restart mezzmo and then I can play again
This is kinda frustrating not being able to play a movie and WATCH OUT not to hit the back button because that's going to screw you.
EDIT 3: so if transcoding a file it's buffering a while (10 seconds) and starts playing the transcoded file
If the transcoding is fast enough, you can continue watching
As mentioned above, hitting the "back" button on the remote kills your viewing experience and you have to start from scratch
BUT ALSO: if the transcoding isn't fast enough, in my case the 10 seconds prebuffering is enough for 2-3 minutes watching and then the transcoding isn't fast enough the
playback of the movie is simply "cut-off" like you hit the "back" button back to the main mezzmo app screen.
Guess what? Same as when hitting the "back" button you can not use this file anymore and have to login on the remote desktop to the server, stop the transcoding, delete
transcoded files, restart mezzmo server..
So the "back" button issue needs to be fixed. probably nothing to do with the back button at all, as the same behavior happens when transcoding not fast enough.
Aside from the "back" button issue, also the issue that the app simply QUITS the player if transcoding isn't fast enough... instead it should just do the "buffering" again
for another 10 seconds to continue another 2-3 minutes
EDIT 4: also if you start playing a movie. Transcode kicks in... friend visits you shortly for 15 minutes so you stop the tv.
After 15 minutes you wanna continue watching so you switch on the tv and klick the movie to be played again..
transcoding is still going on
you again get the message: "sorry, this video can not be played"
I assume the problem with ALL these issues is that maybe because the file isn't filly transcoded yet?
So if playing WHILE being transcoded and not stopping you catch the stream in your app. but if there's any cut off during the transcoding, maybe you must wait for the 100% file complettion?
If that's the case, it has to be changed because it's really sad to wait so long..
__________________________________________________ __________________________________________________ ________________________________________________
I leave 2nd and 3rd issue in place, for reference purposes.
2nd issue:
Found it: lower right change SW to HW fixes this behavior.
when playing 4k movies in the mezzmo app Android TV there's a slight lag/stuttering which is quite annoying (without transcoding selection as with the transcoding it simply refuses to play now)
When I select the mezzmo app NOT to use the mezzo player but using the default player, kodi player, vlc player there's absolutely perfect fluent playback of that file from
the mezzmo server!
So I think there's a noticeable performance bug to the app. If all the other players can playback fluent without any stuttering from the mezzmo DLNA server..
then the mezzmo own player should be able to do that as well IMHO
__________________________________________________ __________________________________________________ ________________________________________________
3rd issue:
EDIT never mind this issue below, driver issue from nvidia. Installing the right (an older!!) driver fixes it. (just keep it here in the post might be helpful for others to know you accidentally might go for
an older driver, even if the error says you need minimum version xxx.xx
I figured out AFTER I bought a Sony that Sony doesn't support subtitles over DLNA in any form. Neither external nor inside an MKV or whatever other possible scenario.
Thankfully we have Mezzmo that can transcode things on the fly.
BUT without the transcoding all the videos are being played by the Sony
if I enable the transcoding on some files I get the message: "sorry, this video can not be played"
EDIT: well first it did the transcoding, I found out, but then it stopped doing transcoding and even files it worked for before are now getting this error for some weird reason.
For ALL the files I use the SAME transcoding in Handbrake
every single Bluray, DVD, VHS, or digital format I ever bought I ALWAYS use the same transcoding in handbrake
before adding it to my local data-storage
so again: if I disable transcoding for these files they can be played, just no subtitles
if in Mezzmo I enable the transcoding, it worked at first and all of the sudden it didn't