Since latest Mezzmo update- all devices and files stutter when playing

Hi,

Since the latest update I have been having an issue with all mezzmo files stuttering on every device I watch them on. I currently watch on a Sony BDP-BX57, Sony BDP-S590, and Sony SMP-N100. I usually pre-transcode files before I watch if I know they are a big file, but that doesn't seem to make a difference. However, my transcoding is also very slow now and regularly fails on larger files. FFMpeg is pushing my CPU to nearly 100% when it runs. I'm using a an i7-3770K @ 3.5Ghz-3.9Ghz and have 32GB of ram, and W8-64. I upgraded the ffmpeg to the latest 64bit version and that made no difference. The other new thing I have noticed is that suddenly, my MezzmoCache folder is empty. I have a 1.5TB drive dedicated to the Cache so that it can keep cached files (regularly watched videos) so it doesn't have to transcode them again. Yet it is empty after the update. Do the updates clear the cache?

The rub is- everything worked flawlessly before the 3.3 update. Should I just revert backwards?

Thanks,
Jon

Here is FFmpeg information on a large file that worked pre-transcoded before the update:

ffmpeg version N-56060-gbcd1c20 Copyright (c) 2000-2013 the FFmpeg developers
built on Sep 6 2013 00:49:05 with gcc 4.7.3 (GCC)
configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libcaca --enable-libfreetype --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-libxvid --enable-zlib
libavutil 52. 43.100 / 52. 43.100
libavcodec 55. 31.101 / 55. 31.101
libavformat 55. 16.101 / 55. 16.101
libavdevice 55. 3.100 / 55. 3.100
libavfilter 3. 83.104 / 3. 83.104
libswscale 2. 5.100 / 2. 5.100
libswresample 0. 17.103 / 0. 17.103
libpostproc 52. 3.100 / 52. 3.100
Input #0, matroska,webm, from 'M:\Video\largetestfile.mkv':
Metadata:
creation_time : 2013-03-04 12:57:18
Duration: 02:49:41.23, start: 0.000000, bitrate: 13986 kb/s
Chapter #0.0: start 0.000000, end 531.531000
Metadata:
title : 00:00:00.000
Chapter #0.1: start 531.531000, end 778.903000
Metadata:
title : 00:08:51.531
Chapter #0.2: start 778.903000, end 994.619000
Metadata:
title : 00:12:58.903
Chapter #0.3: start 994.619000, end 1250.666000
Metadata:
title : 00:16:34.619
Chapter #0.4: start 1250.666000, end 1509.007000
Metadata:
title : 00:20:50.666
Chapter #0.5: start 1509.007000, end 1994.409000
Metadata:
title : 00:25:09.007
Chapter #0.6: start 1994.409000, end 2306.804000
Metadata:
title : 00:33:14.409
Chapter #0.7: start 2306.804000, end 2620.368000
Metadata:
title : 00:38:26.804
Chapter #0.8: start 2620.368000, end 3012.301000
Metadata:
title : 00:43:40.368
Chapter #0.9: start 3012.301000, end 3316.939000
Metadata:
title : 00:50:12.301
Chapter #0.10: start 3316.939000, end 3424.838000
Metadata:
title : 00:55:16.939
Chapter #0.11: start 3424.838000, end 4071.985000
Metadata:
title : 00:57:04.838
Chapter #0.12: start 4071.985000, end 4331.369000
Metadata:
title : 01:07:51.985
Chapter #0.13: start 4331.369000, end 4563.559000
Metadata:
title : 01:12:11.369
Chapter #0.14: start 4563.559000, end 4926.463000
Metadata:
title : 01:16:03.559
Chapter #0.15: start 4926.463000, end 5329.991000
Metadata:
title : 01:22:06.463
Chapter #0.16: start 5329.991000, end 5523.518000
Metadata:
title : 01:28:49.991
Chapter #0.17: start 5523.518000, end 6033.117000
Metadata:
title : 01:32:03.518
Chapter #0.18: start 6033.117000, end 6190.357000
Metadata:
title : 01:40:33.117
Chapter #0.19: start 6190.357000, end 6556.473000
Metadata:
title : 01:43:10.357
Chapter #0.20: start 6556.473000, end 6848.098000
Metadata:
title : 01:49:16.473
Chapter #0.21: start 6848.098000, end 7021.605000
Metadata:
title : 01:54:08.098
Chapter #0.22: start 7021.605000, end 7831.455000
Metadata:
title : 01:57:01.605
Chapter #0.23: start 7831.455000, end 7949.532000
Metadata:
title : 02:10:31.455
Chapter #0.24: start 7949.532000, end 8021.228000
Metadata:
title : 02:12:29.532
Chapter #0.25: start 8021.228000, end 8282.948000
Metadata:
title : 02:13:41.228
Chapter #0.26: start 8282.948000, end 8412.869000
Metadata:
title : 02:18:02.948
Chapter #0.27: start 8412.869000, end 8582.622000
Metadata:
title : 02:20:12.869
Chapter #0.28: start 8582.622000, end 9242.073000
Metadata:
title : 02:23:02.622
Chapter #0.29: start 9242.073000, end 9571.068000
Metadata:
title : 02:34:02.073
Chapter #0.30: start 9571.068000, end 10181.227000
Metadata:
title : 02:39:31.068
Stream #0:0(eng): Video: h264 (High), yuv420p, 1920x1080, SAR 1:1 DAR 16:9, 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc (default)
Metadata:
stereo_mode : left_right
Stream #0:1(eng): Audio: dts (DTS), 48000 Hz, 5.1(side), fltp, 1536 kb/s (default)
At least one output file must be specified

<MEZZMO>: Child process ended with code: 109, ExitCode=1


---> DB Level Info: 41, 100
---> Frame rate: 23.98
---> Aspect ratio: 16:9

I have also downloaded the latest version of Mezzmo this morning and run the repair on my installation. My transcoding is up from 11fps to 30something (it's varying)- but before it was always 44 and higher.

Device profiles in use:

BDP-S590 = Sony BDP (Pal/NTSC, MKV, no Divx)
BDP-BX57 & SMP-N100 = Sony BDP (NTSC, no Divx)

All set to gigabit connections- because it runs smooth that way. The devices are wireless (with statically assigned IP address) but when I was initially setting up Mezzmo, on wireless setting they would stutter. On gigabit- they run perfect. Server is attached to router via 2 NIC's each running Gigabit speeds with Cat6 cables (so each device shows two instances of Mezzmo-great for streaming at two locations- one on each instance). Router is an ASUS RT-AC66U. Signal strength at each device is listed at 100%.

I am going to let the large test file finish pre-transcoding (which is going to take an hour or so) and test again and report back.

Thanks,
Jon

Nope- still stutters within seconds of starting the video, even pre-transcoded.

Hi Jon,

It's best we see a set of logs so we can see what's going wrong. Turn on logging (see http://forum.conceiva.com/showthread...nostic-logging) and restart your Mezzmo server and exit Mezzmo application. Run Mezzmo again and try streaming your file to your device. When it starts stuttering, stop your Mezzmo server and exit Mezzmo. Zip up all the logs and email them to us at support [at] conceiva [dot] com. Also, right-click on video you streamed in Mezzmo and click Properties. On the Properties dialog, go to the Transcoding tab and select the transcoded file. Click the Get FFmpeg Information button and email us this information.

+1, same problem.
Logs etc sent.
cheers,

Thanks - we'll analyze your logs and report back via email.

The latest update has me trans coding 1080p HD files over 10GB in size at an average speed of 45-50fps with bursts over 1500fps (don't know where that came from?). Now that I have my sony devices working again, I'm playing with profiles. The trans-coding is way better, but it still stutters on large files and a lot of files I had pre-transcodes of are now *corrupt or unsupported* when they were working just fine. After re-setting up my profiles the way I had them working before, I got back the files that were corrupt or unsupported. Then, to fix the stuttering further (there was still a mild amount), I reconfigured my router to prioritize TCP ports 53168 and 2869 as well as UDP port 1900. Once I completed that, I rebooted everything, and then started streaming two large files (10GB+) to two of my sony devices. I got a little bit of stutter as the first started up, and then smooth.

Thanks for this update & information, Jon. Sounds like you are up and running now after a few tweaks. If you have any further problem, let us know.