Playback ends when fast forwarding past halfway on Panasonic LCD

Hi,

I am using a Panasonic D25 LED LCD TV. Of the various DLNA servers I have tried to date for Win XP, Mezzmo has proved to be the best by far for playback of TS files. Others I have tried and not been satisfied with include Twonky, Win 7 & Nero.

The only problem I have with Mezzmo so far is during the playback of some TS files, playback will end abruptly about the half way point. An example is:

- TV show recorded has an elapsed time of 1hr:17min
- I wait to make sure the show has been transcoded completely
- I would like to watch the show at some arbitrary point, e.g. after I stopped watching the live broadcast.
- I select the TV show and fast forward.
- At about the 30min mark when fast forwarding (depends on the show), playback is terminated
- If I fast forward to before the 30min mark, playback resumes correctly and past the 30min mark until the end of the show
- Interestingly, once past the 30min mark, pause and fast forward then cause the show to end abruptly.

I will email the logs through. After taking a look, my guess is what ever is happening occurs at about line 4840.

What do you make of it?

Cheers, JP

4831 - Oct 10 10:15:07.984 - > ---------------------------------------------------------------------


4832 - Oct 10 10:15:07.984 - INFO > 864 PostSelect: TriggerSendOK = 1


4833 - Oct 10 10:15:07.984 - INFO > 864 fd_counts: readset = 7, writeset = 5, errorset = 6


4834 - Oct 10 10:15:07.984 - INFO > 864 fd_counts: readset = 7, writeset = 5, errorset = 6


4835 - Oct 10 10:15:08.000 - INFO > 864 fd_counts: readset = 7, writeset = 5, errorset = 6


4836 - Oct 10 10:15:08.000 - > Disconnect: socket 4832


4837 - Oct 10 10:15:08.000 - WARN > HTTP-GET request aborted by client endpoint. session = 2E15F33


4838 - Oct 10 10:15:08.046 - > D78 [ Panasonic BDP]: session 03470034, socket 4728, f = 10, cp/tb/l/t = 3161480875 / 4399398912 / 4396515669 / 262113


4839 - Oct 10 10:15:08.046 - OUT > D78 SendTo: (send) socket 4728, length = 262113, bytes sent = -1


}"<(d
4840 - Oct 10 10:15:08.046 -


---start hex dump---


---possible binary detected! truncating output to 2 bytes---


20 [ ] 7D [}]


---end hex dump-----





4841 - Oct 10 10:15:08.046 - > ---------------------------------------------------------------------


4842 - Oct 10 10:15:08.046 - > Disconnect: socket 4972


4843 - Oct 10 10:15:08.046 - INFO > D78 SendTo: we are blocked on socket 4728


4844 - Oct 10 10:15:08.046 - INFO > D78 Not everything was sent on socket 4728, we need to wait for SendOK event to continue (PAUSE = 1)!

Hi,

We'll need the full logs to understand it better and I think you've already sent them in, right?

There's an updated device profile for Vieras that we have here, but the first thing I notice from the snippet above is that you're using the "Panasonic BDP" device profile instead of "Panasonic Viera", so that's the first thing that needs changing (via the Media Devices dialog). I'll send you an updated device profile to try as well (via e-mail).

Yes, logs have been emailed in.

I did notice the "Panasonic BDP" even though I had manually changed the profile to "Panasonic Viera", however will need to need to double check to be sure.

Cheers, JP

Thanks - we got them and I'll get back to you via e-mail.