Vizio M Series Profile Editing (So Close!)
So, I've been tinkering for a couple days now to get a working profile script for my Vizio M series TV (M422I-B1) Model. But I'd imagine this would apply for other M series models as well.
This will decode all video formats I've thrown at it *(.mkv, .avi, .mpg, .mpeg, .mp4) Into H264 Format with AC3 Audio (registers as Dolby DTS on the TV DLNA)
It even allows you to fast-forward/Rewind without issue.
Only thing I can't figure out, is how to get it to stream my subtitle .srt files externally, you can see at the bottom i attempted to tinker with it to allow SubRip format. Without success though.
So if anyone wants to help me get subtitles working, I'd more than appreciate it :D!
<MezzmoDeviceProfile>
<version>302</version>
<device>
<guid>64EE68F1-8026-4738-A126-8511B3083BDB</guid>
<name manufacturer="Vizio" model="Smart TV" profileactive="1" understandsdlnaprofileid="0" turnoffbyterangedlna="1" needsdlnaprotocolinfo="1"/>
<useragent>COPY</useragent>
<xavclient></xavclient>
<xavphysicalunit></xavphysicalunit>
<friendlynamedlnaorg></friendlynamedlnaorg>
<upnpmodel></upnpmodel>
<upnpmanufacturer></upnpmanufacturer>
<upnpfriendlyname></upnpfriendlyname>
<mezzmoserver></mezzmoserver>
<transcoding enabled="1" minimumstreamingsize="10000000" waitmsbeforestreaming="5000" contentlength="0" />
<devicedescription>GenericDeviceDescription.xml</devicedescription>
<videomax width="1920" height="1080" />
<imagemax width="4096" height="4096" />
</device>
<descriptiondeliveryrules>
<!-- delivery description rules specify what the device will see for each file. A file is considered to be supported if
it matches a format, audio/video codecs within that format and any codec limits in this device profile. Best fit is
if one of the 2 stream from a format description matches the original file. Preferred transcoded format describes
the best quality format a device can play. Transcoded list is all combinations of formats that we can encode to,
possibly including preferred transcoded and baseline. When building a file description, Mezzmo follows the following
rules order: supported, bestfit, preferredtranscoded, transcodedlist, baseline, nonsupported -->
<!-- please note that if transcoding is disabled or baseline and preferredtranscoded are set to no,
then the nonsupported flag is automatically set to yes. If transcoding is disabled, then only supported and
nonsupported rules are checked and used. -->
<supported>yes</supported>
<!-- baseline, bestfit, transcodedlist, nonsupported and preferredtranscoded can be either one of: yes, no, auto
yes = always deliver, no = never deliver, auto = deliver if not delivered already by one of the rules above it -->
<bestfit>auto</bestfit>
<preferredtranscoded>auto</preferredtranscoded>
<transcodedlist>auto</transcodedlist>
<baseline>auto</baseline>
<nonsupported>auto</nonsupported>
</descriptiondeliveryrules>
<avcontainer id="mpegts" name="mpegts" mimetype="video/mpeg" encode="1" format="mpegts" supportschunked="1">
<video>
<format id="h264" encode="1" codec="libx264" ffmpegadditional="h264+encoding" preferredtranscoded="1">
</format>
</video>
<audio>
<format id="ac3" encode="1" codec="ac3" preferredtranscoded="1">
<channels>2</channels>
<channels>6</channels>
<bitrate>448000</bitrate>
<maxbitrate>448000</maxbitrate>
<minbitrate>64000</minbitrate>
<samplingrate>48000</samplingrate>
</format>
</audio>
<ffmpegadditional id="union+thread0" />
</avcontainer>
<avcontainer id="mpeg" name="mpeg" mimetype="video/mpeg" encode="1" baseline="1" dlnaprofile="MPEG_PS_PAL,MPEG_PS_NTSC" format="vob" supportschunked="0">
<video>
<format id="mpeg2video" encode="1" codec="mpeg2video" ffmpegadditional="mpeg2+encoding">
<copyts>0</copyts>
<samequality>0</samequality>
<maxbitrate>140000000</maxbitrate>
<bitrate>86000000</bitrate>
<bufsize>1835008</bufsize>
</format>
</video>
<audio>
<format id="ac3" encode="1" codec="ac3" preferredtranscoded="1">
<channels>2</channels>
<channels>6</channels>
<bitrate>448000</bitrate>
<maxbitrate>448000</maxbitrate>
<minbitrate>64000</minbitrate>
<samplingrate>48000</samplingrate>
</format>
</audio>
<ffmpegadditional id="union+thread0" />
</avcontainer>
<avcontainer id="jpeg" name="jpeg_lrg" mimetype="image/jpeg" encode="1" baseline="1" dlnaprofile="JPEG_LRG" supportschunked="0">
<image>
<format id="jpeg" mimetype="image/jpeg" encode="1" codec="98" quality="2">
<maxdimensions width="4096" height="4096" />
<maxbits>24</maxbits>
</format>
</image>
</avcontainer>
<avcontainer id="jpeg" name="jpeg_med" mimetype="image/jpeg" encode="1" baseline="1" dlnaprofile="JPEG_MED" preferredtranscoded="1" supportschunked="0">
<image>
<format id="jpeg" mimetype="image/jpeg" encode="1" codec="98" preferredtranscoded="1">
<maxdimensions width="1024" height="768" />
<maxbits>24</maxbits>
</format>
</image>
</avcontainer>
<avcontainer id="jpeg" name="jpeg_sm" mimetype="image/jpeg" encode="1" baseline="1" dlnaprofile="JPEG_SM" supportschunked="0">
<image>
<format id="jpeg" mimetype="image/jpeg" encode="1" codec="98">
<maxdimensions width="640" height="480" />
<maxbits>24</maxbits>
</format>
</image>
</avcontainer>
<avcontainer id="jpeg" name="jpeg_tn" mimetype="image/jpeg" encode="1" baseline="1" dlnaprofile="JPEG_TN" preferredthumbnail="1" supportschunked="0">
<image>
<format id="jpeg" mimetype="image/jpeg" encode="1" codec="98" quality="2">
<maxdimensions width="160" height="160" />
<maxbits>24</maxbits>
</format>
</image>
</avcontainer>
<subtitles>
<encodings bom="no">65001</encodings>
<allowembedded>no</allowembedded>
<allowexternal formats="srt,subrip,text,xsub">yes</allowexternal>
<allowburnings>yes</allowburnings>
</subtitles>
</MezzmoDeviceProfile>
