New network configuration, new issues
Hi all,
I have changed a little bit my home network config and I had some issues with the mezzmo streaming.
My rig is so composed:
- Intel NUC8i5BEH as server (mezzmo 6.0.6.0 installed here)
- QNAP NAS TS-832X as media repository
the server has M.2 drive and lot of ram, the nas has 7 disks, just in case you could think my issues came from possible bottleneck on the hardware.
my network config before the change:
- 1Gbit router (192.168.1.x IPs)
|_ 1Gbit Switch to connect the TVs
|_ 1Gbit Switch to connect multiple devices (the NUC take internet connection from here)
then, because the NAS has 2SFP+ 10Gbit port, I connected the NUC (using the QNAP QNA-T310G1S thunderbolt-SFP+ adapter as network card) and another PC to the NAS via this 10Gbit connection.
Everything was configured to create such 2 separate subnetworks with differents IP ranges (192.168.2.x) so that I could force access to the NAS using different IPs
till now, everything worked grate, the NUC took file from the NAS using the 10Gbit network and Mezzmo worked nice and smooth.
Today I decided to buy a new SFP+ 10Gbit Switch. This has 1 RJ45 1Gbit port used to connect it to the main router and 4 SFP+ port I used to connect the NAS, the NUC and another PC.
my network config after the change:
- 1Gbit router (192.168.1.x IPs)
|_ 1Gbit Switch to connect the TVs
|_ 1Gbit Switch to connect multiple devices
|_ 10Gbit Switch to connect the NUC and the NAS (the NUC now take internet connection from here)
Everything is still perfect in the network, but I really can't make Mezzmo to works fine.
I obviously had to remap on windows the network storage from the 192.168.2.x IPs to the 192.168.1.x ones, updated this on mezzmo library (tryed even resetting the library and adding from scratch the folders) and till this exact moment I had many problem using Mezzmo.
Just to be clear, I can see the folders on the TVs, I see all the media into them, (very slowly) but when I try to play a movie, this start to stop continously, stopping, or even not being able to reproduce.
First try I did: installed mezzmo on the other 10Gbit PC connected to the same new switch, everything is ok, so the new switch is not the cause, neither the new 10Gbit connection.
Second try I did: because the NUC has no network problems, and so the QNA-T310G1S seems to work good for random use, I just put again a LAN cable between the NUC and the old switch, configured mezzmo to use this network to stream contents, this way it's still ok. 10Gbit is still used to take the movies from the NAS, so it seems to be something related to the way mezzmo streams contents to the devices
at this point I would like to understand what's wrong and how could I fix this...please help me!
Many Thanks,
Alex
