-
files stuttering bad
Computer is AMD PhenomII 955 quad core 16gb ram hard wired network my switches that connect my homes computers and tv's are all 10/100/1000. I have 2 WD Live boxes that dont stutter at all with movies playing on both and purchased Mezzmo so as to not have to buy another WD Live Box and with nothing playing the movie stutters on my Bravia KDL-55NX810 please help I have 4 other TV's.
-
Hi mikeg,
When you play a movie on your Sony Bravia TV and it starts to stutter, go back to Mezzmo on your PC and check the Transcoding tab. Check if your video is listed there and is marked red. If it is, then transcoding on-the-fly is not fast enough for real time playback. One solution is to pre-transcode the video before playing it (see http://forum.conceiva.com/showthread...nscoding-Files).
Let us know the device profile that is assigned to your TV in Mezzmo. Go to the Media Devices dialog to see this.
Also, post the FFmpeg information for the video that stuttered. Right-click on the video in Mezzmo and click 'Get FFmpeg Information'.
-
I checked the transcoding tab when i was creating the log file you looked at and although it was stuttering it was NOT marked red?
Device profile is Sony Bravia KDL (2011 models)
ffmpeg version N-50460-g393dcbf Copyright (c) 2000-2013 the FFmpeg developers
built on Mar 4 2013 17:38:17 with gcc 4.6.2 (GCC)
configuration: --enable-memalign-hack --arch=x86 --target-os=mingw32 --cross-prefix=i686-w64-mingw32- --enable-static --disable-shared --enable-zlib --disable-postproc --prefix=/home/peter/ffmpeg/build/gpl --enable-libmp3lame --enable-libx264 --enable-gpl --extra-libs='-lx264 -lpthread' --enable-runtime-cpudetect --extra-cflags=-I/home/peter/cc/include --extra-ldflags=-L/home/peter/cc/lib --pkg-config=pkg-config --disable-w32threads --enable-zlib
libavutil 52. 17.103 / 52. 17.103
libavcodec 54. 92.100 / 54. 92.100
libavformat 54. 63.102 / 54. 63.102
libavdevice 54. 3.103 / 54. 3.103
libavfilter 3. 41.100 / 3. 41.100
libswscale 2. 2.100 / 2. 2.100
libswresample 0. 17.102 / 0. 17.102
Input #0, matroska,webm, from 'E:\Movies J-P\John Carter 2012 1080p.mkv':
Duration: 02:12:01.63, start: 0.000000, bitrate: 10668 kb/s
Chapter #0.0: start 0.000000, end 241.241000
Metadata:
title : 00:00:00.000
Chapter #0.1: start 241.241000, end 622.914000
Metadata:
title : 00:04:01.241
Chapter #0.2: start 622.914000, end 1208.791000
Metadata:
title : 00:10:22.914
Chapter #0.3: start 1208.791000, end 1625.207000
Metadata:
title : 00:20:08.791
Chapter #0.4: start 1625.207000, end 2249.164000
Metadata:
title : 00:27:05.207
Chapter #0.5: start 2249.164000, end 2863.569000
Metadata:
title : 00:37:29.164
Chapter #0.6: start 2863.569000, end 3531.653000
Metadata:
title : 00:47:43.569
Chapter #0.7: start 3531.653000, end 4062.433000
Metadata:
title : 00:58:51.653
Chapter #0.8: start 4062.433000, end 4501.038000
Metadata:
title : 01:07:42.433
Chapter #0.9: start 4501.038000, end 4954.199000
Metadata:
title : 01:15:01.038
Chapter #0.10: start 4954.199000, end 5429.799000
Metadata:
title : 01:22:34.199
Chapter #0.11: start 5429.799000, end 5822.066000
Metadata:
title : 01:30:29.799
Chapter #0.12: start 5822.066000, end 6412.031000
Metadata:
title : 01:37:02.066
Chapter #0.13: start 6412.031000, end 6828.989000
Metadata:
title : 01:46:52.031
Chapter #0.14: start 6828.989000, end 7374.534000
Metadata:
title : 01:53:48.989
Chapter #0.15: start 7374.534000, end 7921.634000
Metadata:
title : 02:02:54.534
Stream #0:0(eng): Video: h264 (High), yuv420p, 1920x800, SAR 1:1 DAR 12:5, 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc (default)
Stream #0:1(eng): Audio: dts (DTS), 48000 Hz, 5.1(side), fltp, 1536 kb/s (default)
Stream #0:2(eng): Subtitle: subrip (default) (forced)
Stream #0:3(eng): Subtitle: subrip
At least one output file must be specified
<MEZZMO>: Child process ended with code: 109, ExitCode=1
---> DB Level Info: 41, 100
---> Frame rate: 23.98
---> Aspect ratio: 12:5
-
Understand. Try pre-transcoding the video. After it completes transcoding, try playing it and see if it plays smoothly.
-
Ok Paul so I upgraded processor and motherboard (it was due for an upgrade) I now have an 8 core 3.5 ghz Amd 8320 unlocked black edition and it still is hit and miss with some movies, I have one that transcoded at 850 fps and the playback has a bunch of blocks in it but when I play it on the same tv with my WD Live no problems clear as a bell? I looked to see CPU usage and it was only around 10%?
-
Hi mikeg,
The 850 fps tells us that Mezzmo was remuxing the video. Just to explain - a video file (e.g. movie.MKV) is made of the video file container (e.g. MKV matroska) and inside the video file container are various video channels (e.g. H264, MPEG-2, MPEG-4), audio channels (e.g. DTS, AC3, AAC) and subtitle channels (SRT, SUB, ASS). When Mezzmo has to transcode a video to another format, it will prefer to copy (or remux) the video or audio channels into the new file container since this is very fast (as compared to converting to another format). So, in your case, your Sony TV cannot play MKV files and Mezzmo remuxed the video and audio channels into a compatible file container, such as MPEG-TS. The fact that your WD TV Live can play the video well but your Sony TV cannot shows that they both have different firmware that read and play videos differently. For the video that is 'blocky', try pre-transcoding it - but make sure you select the 'Force full transcode' checkbox to stop any remuxing. For details on pre-transcoding, see http://forum.conceiva.com/showthread...nscoding-Files.
-
Understood, I will try that. Next question my TV is a 2011 and with the KDL 2011 profile no Avi files show up in the list on TV they are in the library.
-
ok I tried that and it failed right away this is what it spit out.
C:\Program Files (x86)\Conceiva\Mezzmo\ffmpeg.exe -y -i "E:\Movies J-P\Jonah.Hex.2010.1080p.mkv" -map 0:v:0 -map 0:a:0 -c:v:0 libx264 -b:v 15000000 -level 41 -profile:v main -filter:v "yadif" -pix_fmt yuv420p -copyinkf -coder 1 -flags +loop -fflags +genpts -subq 7 -me_range 16 -g 250 -keyint_min 25 -sc_threshold 40 -b_strategy 1 -x264opts direct-pred=auto:b-pyramid=normal:mixed-refs=1:weightb=1:8x8dct=1:fast-pskip=1:crf=22:ref=2:bframes=3:aud=1:me=hex -partitions -parti8x8-parti4x4-partp8x8-partp4x4-partb8x8 -bidir_refine 1 -c:a:0 ac3_fixed -ac 6 -ab 640000 -ar 48000 -sn -threads 0 -async 0 -f mpegts "C:\Users\mike\AppData\Local\Conceiva\Mezzmo\Trans codingFiles\F08B2E77-B337-4bbb-A3E3-50BA09E5A03E\Video\45-mpegts_transcoding-libx264-ac3-sn.mzt"
ffmpeg version N-50460-g393dcbf Copyright (c) 2000-2013 the FFmpeg developers
built on Mar 4 2013 17:38:17 with gcc 4.6.2 (GCC)
configuration: --enable-memalign-hack --arch=x86 --target-os=mingw32 --cross-prefix=i686-w64-mingw32- --enable-static --disable-shared --enable-zlib --disable-postproc --prefix=/home/peter/ffmpeg/build/gpl --enable-libmp3lame --enable-libx264 --enable-gpl --extra-libs='-lx264 -lpthread' --enable-runtime-cpudetect --extra-cflags=-I/home/peter/cc/include --extra-ldflags=-L/home/peter/cc/lib --pkg-config=pkg-config --disable-w32threads --enable-zlib
libavutil 52. 17.103 / 52. 17.103
libavcodec 54. 92.100 / 54. 92.100
libavformat 54. 63.102 / 54. 63.102
libavdevice 54. 3.103 / 54. 3.103
libavfilter 3. 41.100 / 3. 41.100
libswscale 2. 2.100 / 2. 2.100
libswresample 0. 17.102 / 0. 17.102
Input #0, matroska,webm, from 'E:\Movies J-P\Jonah.Hex.2010.1080p.mkv':
Metadata:
creation_time : 2010-10-02 20:31:43
Duration: 01:21:30.50, start: 0.000000, bitrate: 14382 kb/s
Stream #0:0(eng): Video: h264 (High), yuv420p, 1920x800, SAR 1:1 DAR 12:5, 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc
Metadata:
title : Jonah.Hex.2010.Bluray.1080p.DTS.x264-CHD
Stream #0:1(eng): Audio: dts (DTS), 48000 Hz, 5.1(side), fltp, 1536 kb/s (default)
Metadata:
title : Jonah.Hex.2010.DTS-HD.MA Core_1509kbps
Stream #0:2(eng): Audio: ac3, 48000 Hz, 5.1(side), fltp, 448 kb/s
Stream #0:3(dut): Subtitle: subrip (default)
[libx264 @ 038d0860] using SAR=1/1
[libx264 @ 038d0860] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 AVX XOP FMA4 FMA3 SSEMisalign LZCNT BMI1 TBM
[libx264 @ 038d0860] profile Main, level 4.1
Output #0, mpegts, to 'C:\Users\mike\AppData\Local\Conceiva\Mezzmo\Trans codingFiles\F08B2E77-B337-4bbb-A3E3-50BA09E5A03E\Video\45-mpegts_transcoding-libx264-ac3-sn.mzt':
Metadata:
encoder : Lavf54.63.102
Stream #0:0(eng): Video: h264, yuv420p, 1920x800 [SAR 1:1 DAR 12:5], q=-1--1, 15000 kb/s, 90k tbn, 23.98 tbc
Metadata:
title : Jonah.Hex.2010.Bluray.1080p.DTS.x264-CHD
Stream #0:1(eng): Audio: ac3, 48000 Hz, 5.1, s16p, 640 kb/s (default)
Metadata:
title : Jonah.Hex.2010.DTS-HD.MA Core_1509kbps
Stream mapping:
Stream #0:0 -> #0:0 (h264 -> libx264)
Stream #0:1 -> #0:1 (dca -> ac3_fixed)
Press [q] to stop, [?] for help
[mpegts @ 015ff940] st:0 PTS: 179970 DTS: 179970 < 180736 invalid, clipping
frame= 44 fps=0.0 q=0.0 size= 0kB time=00:00:02.25 bitrate= 0.0kbits/s
<MEZZMO>: Child process ended with code: 109, ExitCode=1
-
Changed profile to kdl 2010, I will see what happens at least it is doing the full force transcode.
-
OK - let us know how you go.