Results 1 to 10 of 55

Thread: Trailers not streaming part 2

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jun 2012
    Posts
    1,069

    Default

    Quote Originally Posted by spags65 View Post
    I receive following output for command adjust format 10. Am I missing something?

    C:\Program Files\MezzmoTrailerChecker>trailer_checker.py adjust format 10
    Mezzmo Trailer Checker started - version 0.0.18 mkv test
    Mezzmo check trailer database completed.

    The valid trailer adjust options are: number and frame

    Mezzmo Trailer Checker completed successfully.

    C:\Program Files\MezzmoTrailerChecker>
    That looks like the original test version before i added the bulk update / adjust capability. Use the special version for right now and once you confirm that is good that is good I'll post an official v0.0.18 version and you can delete the other test versions.


    Thanks,

    Jeff

  2. #2
    Join Date
    May 2016
    Posts
    32

    Default

    Update works. Thank you. I am almost finished changing the in correct pathes in mezzmo. Once finished, i will run a sync command and then update. Almost done.

    Thank you. Thank you.

  3. #3
    Join Date
    Jun 2012
    Posts
    1,069

    Default

    Quote Originally Posted by spags65 View Post
    Update works. Thank you. I am almost finished changing the in correct pathes in mezzmo. Once finished, i will run a sync command and then update. Almost done.

    Thank you. Thank you.
    Thanks for the update. I personally like the local high quality trailers. If you ever use Kodi I have a feature in the Mezzmo Kodi Addon called Mezzmo Movie Previews where you can select up to 6 previews to play prior to the main movie. They can either be from the current year or the year the movie was released, if you want to have a more original movie time experience. I use this feature often.

    I'll post the official 0.0.18 release tomorrow.


    Jeff

  4. #4
    Join Date
    May 2016
    Posts
    32

    Default

    Jeff,

    Ever since implementing conversion python script, I have received the following error of index out of range. I replaced config file to original and rolled back to version 17 python script. I am still receving the same error. How do i sync the index again?

    C:\Program Files\MezzmoTrailerChecker>trailer_checker.py trailer
    Mezzmo Trailer Checker started - version 0.0.17
    Mezzmo check trailer database completed.
    Finished getting Mezzmo Trailer records.
    Mezzmo Trailer Checker found 15 movies to check trailers.
    Found 0 Youtube trailers: Part 1: Days 1-7
    list index out of range
    There was a problem getting the movie list.
    Finished getting Mezzmo Trailer records.
    There were no trailers found which need checking.
    Mezzmo Trailer Checker completed successfully.

  5. #5
    Join Date
    May 2016
    Posts
    32

    Default

    Update. I removed the trailer checker database and reran the script. After about 20 runs, I updated 8 trailers and then started receiving index out of range. I then below away database again and rolled back to python 17 script with config. Ran script around 20 times downloading 8 trailers and then received index error again. Do i need to connect a client to trailer checker database to investigate issue?

  6. #6
    Join Date
    Jun 2012
    Posts
    1,069

    Default

    Quote Originally Posted by spags65 View Post
    Update. I removed the trailer checker database and reran the script. After about 20 runs, I updated 8 trailers and then started receiving index out of range. I then below away database again and rolled back to python 17 script with config. Ran script around 20 times downloading 8 trailers and then received index error again. Do i need to connect a client to trailer checker database to investigate issue?
    Sorry for the delay getting back to you. I have been traveling and just got back. I had connectivity issues and couldn't respond while traveling. No, I don't think we need an SQL browser client to troubleshoot this. The Show and CSV export commands are sufficient to look into the database. Based upon the error message and what you have done, this is unlikely to be a version problem but more likely the Trailer Checker is getting something from Mezzmo that it has not accounted for, thus causing the error. It shouldn't be too hard to pin down.

    My first question is if the error is always occurring on the same movie: "Part 1: Days 1-7" or across multiple movies ? If so, what would help is seeing the output of a show name or show number for a failing movie and what is in the trailers properties in Mezzmo. Also it would be helpful to get a copy of your logfile when you run the trailer command and get the error. With this I should be able to pin down what is happening. You can send me the logfile snippet in a private message here. I just need a filed run not the whole file.


    Thanks,

    Jeff
    Last edited by jbinkley60; 10-07-2023 at 11:59 AM.

  7. #7
    Join Date
    May 2016
    Posts
    32

    Default

    I found the issue. Any database record with trailer for a tv show crash out. Once I added entry for "lastchecked" & "trstatus" script skipped over tv show entries.

Similar Threads

  1. Trailers not streaming
    By spags65 in forum Mezzmo Questions and Support
    Replies: 2
    Last Post: 09-08-2023, 10:27 AM
  2. Season/Episode AND part naming
    By spoid in forum Mezzmo Questions and Support
    Replies: 1
    Last Post: 09-07-2014, 11:30 AM
  3. Trailers
    By goingmad in forum Mezzmo Questions and Support
    Replies: 1
    Last Post: 07-01-2014, 07:05 AM
  4. Metadata for multi-part movies
    By Synn in forum Mezzmo Questions and Support
    Replies: 4
    Last Post: 02-25-2013, 09:36 AM
  5. Part of the dialog window is invisible
    By Konstant in forum DownloadStudio Questions and Support
    Replies: 2
    Last Post: 03-09-2012, 08:29 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •