Results 1 to 4 of 4

Thread: panasonic G20 and LG HX806PE problems

  1. #1
    Join Date
    Dec 2011
    Posts
    2

    Question panasonic G20 and LG HX806PE problems

    hello,
    i have 2 test files and 2 devices. none of them seems to work correctly with Mezzmo.

    Panasonic G20:
    file1:
    file1 is working perfectly on my TV. It is using transcoding. Image is smooth and guality is good. It is using 5.1 audio(my tv is showing 5.1, but my home cinema system is showing only 2.1, but all 5.1 speakers are playing - this could be caused by inability to pass through 5.1 audio from almost all feeds to optical audio out)
    Code:
    ffmpeg version N-33781-g35674a2, Copyright (c) 2000-2011 the FFmpeg developers
      built on Oct 19 2011 10:31:16 with gcc 4.6.1
      configuration: --enable-memalign-hack --arch=x86 --target-os=mingw32 --cross-prefix=i686-w64-mingw32- --enable-static --disable-shared --enable-zlib --disable-postproc --prefix=/media/ffmpeg --enable-libmp3lame --enable-libx264 --enable-gpl --extra-libs='-lx264 -lpthread' --enable-runtime-cpudetect --extra-cflags=-I/home/dennis/cc/include --extra-ldflags=-L/home/dennis/cc/lib --pkg-config=pkg-config
      libavutil    51. 22. 0 / 51. 22. 0
      libavcodec   53. 21. 0 / 53. 21. 0
      libavformat  53. 16. 1 / 53. 16. 1
      libavdevice  53.  4. 0 / 53.  4. 0
      libavfilter   2. 44. 0 /  2. 44. 0
      libswscale    2.  1. 0 /  2.  1. 0
    
    Seems stream 0 codec frame rate differs from container frame rate: 47.95 (20000000/417083) -> 23.98 (24000/1001)
    Input #0, matroska,webm, from 
      Duration: 01:46:01.35, start: 0.000000, bitrate: 7345 kb/s
        Stream #0:0(eng): Video: h264 (High), yuv420p, 1280x690, SAR 1:1 DAR 128:69, 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc
        Metadata:
        Stream #0:1(eng): Audio: dts (DTS), 48000 Hz, 5.1(side), s16, 1536 kb/s (default)
        Metadata:
    At least one output file must be specified
    ---> DB Level Info: 41, 100
    ---> Frame rate: 23,98
    ---> Aspect ratio: 128:69
    File2:
    file2 on PanaG20 - giving me error: file not supported

    Code:
    ffmpeg version N-33781-g35674a2, Copyright (c) 2000-2011 the FFmpeg developers
      built on Oct 19 2011 10:31:16 with gcc 4.6.1
      configuration: --enable-memalign-hack --arch=x86 --target-os=mingw32 --cross-prefix=i686-w64-mingw32- --enable-static --disable-shared --enable-zlib --disable-postproc --prefix=/media/ffmpeg --enable-libmp3lame --enable-libx264 --enable-gpl --extra-libs='-lx264 -lpthread' --enable-runtime-cpudetect --extra-cflags=-I/home/dennis/cc/include --extra-ldflags=-L/home/dennis/cc/lib --pkg-config=pkg-config
      libavutil    51. 22. 0 / 51. 22. 0
      libavcodec   53. 21. 0 / 53. 21. 0
      libavformat  53. 16. 1 / 53. 16. 1
      libavdevice  53.  4. 0 / 53.  4. 0
      libavfilter   2. 44. 0 /  2. 44. 0
      libswscale    2.  1. 0 /  2.  1. 0
    Input #0, matroska,webm, from 
      Duration: 00:45:21.72, start: 0.000000, bitrate: 6900 kb/s
        Stream #0:0(eng): Video: h264 (High), yuv420p, 1280x720, SAR 1:1 DAR 16:9, 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc (default)
        Stream #0:1(eng): Audio: ac3, 48000 Hz, 5.1(side), s16, 640 kb/s (default)
        Stream #0:2(eng): Subtitle: text
    At least one output file must be specified
    ---> DB Level Info: 41, 100
    ---> Frame rate: 23,98
    ---> Aspect ratio: 16:9
    LG HX806PE bluray 5.1 home cinema
    File1 (same as file1 above)
    video in unwatchable. choppy in almost every faster scene. LG should support mkv and h264 via DLNA, so transcoding is not used for this file.
    i tried to force transcoding(to lower quality and enhance fps) by setting my media device "Deliver media files supported by device:" option to "never deliver". after this was set, transcoding was still not used. i checked "transcoding settings" -> "folder size" which remains 0.00GB while the movie is playing.
    audio seems to be only 2.1 - at least that is the information on my home cinema device.(all 5.1 speakers are active)

    File2(same as file2 above)
    this file is perfect. even fast and action scenes are smooth.
    as above, my device is saying that only 2.1 audio is used (all 5.1 speakers are active)

    One additional problem was that by default Mezzmo detected my LG system as "Marantz BDP". i tried it using this setting and also LG bluray and LG bluray LPCM. no luck fixing all problems with any setting.

  2. #2
    Join Date
    Nov 2007
    Location
    Melbourne, Australia
    Posts
    11,646

    Default

    Thanks for the detailed information.

    With regards your Panasonic G20, you don't mention the device profile you are using. Can you try using the 'Panasonic Viera' device profile? Go to the Media Devices dialog in Mezzmo to set this. Also, delete your transcoded files using the Transcoding Settings dialog. If no success playing your files, then try the other Panasonic Viera device profiles available (2011 models & 2011 models, NTSC). Restart your Mezzmo server after each change. If no success, then please enable logging (see this thread: http://forum.conceiva.com/showthread...nostic-logging). Delete your transcoded files again using the Transcoding Settings dialog in Mezzmo. Next, start your Mezzmo server and stream the file that fails to play on your TV. When it fails, stop your Mezzmo server. Zip up all the logs and send them to us. We'll check out what is going wrong.

    With regards your LG Blu-ray player, we'll need to see a set of logs as well. First, set the device profile to "LG BluRay" and then capture a set of logs when you stream some files that don't play. Zip up all the logs and send them to us. We'll check out what is going wrong.

    Mezzmo Android: Install it on your tablet, smartphone, Android TV or Amazon Fire to browse and stream files from your Mezzmo library to all your devices. Full details at http://www.conceiva.com/products/mez...mo_android.asp
    Mezzmo for Kodi Add-on: Install it into Kodi to stream files from your Mezzmo library directly in Kodi. Full details at http://www.mezzmo.com/wiki/doku.php?...odi_user_guide
    Mezzmo for Roku App: Install it onto your Roku to stream files from your Mezzmo library. Full details at http://www.mezzmo.com/wiki/doku.php?...oku_user_guide
    Wiki: User Guides & Reference Manual at http://www.mezzmo.com/wiki
    Facebook: http://www.facebook.com/Mezzmo.DLNA.Server
    Twitter: https://twitter.com/conceiva_mezzmo
    Web: http://www.mezzmo.com

  3. #3
    Join Date
    Dec 2011
    Posts
    2

    Default

    meanwhile, is there any way how to force mezzmo to transcode mkv files when playing this files on my LG system? i wanted to watch whole mkv video today, it keeps slowing down constantly, video gets unwatchable. when i pause the video for a while, it seems to buffer few minutes then it slows down again. file is not transcoded(transcode folder is still 0.00GB).

    watching any video via my TV is not acceptable, because it always strips 5.1 audio input down to 2.0 (even on optic audio out - confirmed by forums and panasonic tech support).

    thanks.

  4. #4
    Join Date
    Nov 2007
    Location
    Melbourne, Australia
    Posts
    11,646

    Default

    The new version of Mezzmo has a feature called 'pre-transcoding' and you can force your files to be transcoded & streamed into certain formats for certain devices. This should allow you to stream files to your LG without stuttering/slowing down. We should be releasing the new version in the next 1-2 days.

    Mezzmo Android: Install it on your tablet, smartphone, Android TV or Amazon Fire to browse and stream files from your Mezzmo library to all your devices. Full details at http://www.conceiva.com/products/mez...mo_android.asp
    Mezzmo for Kodi Add-on: Install it into Kodi to stream files from your Mezzmo library directly in Kodi. Full details at http://www.mezzmo.com/wiki/doku.php?...odi_user_guide
    Mezzmo for Roku App: Install it onto your Roku to stream files from your Mezzmo library. Full details at http://www.mezzmo.com/wiki/doku.php?...oku_user_guide
    Wiki: User Guides & Reference Manual at http://www.mezzmo.com/wiki
    Facebook: http://www.facebook.com/Mezzmo.DLNA.Server
    Twitter: https://twitter.com/conceiva_mezzmo
    Web: http://www.mezzmo.com

Similar Threads

  1. Several problems to report
    By moondial in forum Mezzmo Questions and Support
    Replies: 13
    Last Post: 10-17-2011, 06:15 PM
  2. Having some problems.
    By Vancar in forum Mezzmo Questions and Support
    Replies: 1
    Last Post: 06-08-2011, 10:01 AM
  3. Panasonic Viera - Fast Forward problems
    By casualty in forum Mezzmo Questions and Support
    Replies: 1
    Last Post: 03-29-2011, 10:00 AM
  4. Replies: 1
    Last Post: 12-06-2010, 02:43 PM
  5. Start up problems.
    By daddydon in forum DownloadStudio Questions and Support
    Replies: 2
    Last Post: 10-27-2010, 02:20 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •