Results 1 to 4 of 4

Thread: Panasonic blu-ray sa-bt230

  1. #1
    Join Date
    Jan 2012
    Location
    Uk
    Posts
    92

    Default Panasonic blu-ray sa-bt230

    Hi, has anyone has any luck with the above? I can see mezzmo but can't play any files, not sure what profile to use.

    Thanks
    Last edited by Roofus; 03-14-2012 at 08:49 AM.

  2. #2
    Join Date
    Nov 2007
    Location
    Melbourne, Australia
    Posts
    11,646

    Default

    Please try the 'Panasonic BDP' or 'Panasonic HT' device profiles with this device. Go to the Media Devices dialog to set the device profile. Let us know if you still have problems.

    Mezzmo Android: Install it on your tablet, smartphone, Android TV or Amazon Fire to browse and stream files from your Mezzmo library to all your devices. Full details at http://www.conceiva.com/products/mez...mo_android.asp
    Mezzmo for Kodi Add-on: Install it into Kodi to stream files from your Mezzmo library directly in Kodi. Full details at http://www.mezzmo.com/wiki/doku.php?...odi_user_guide
    Mezzmo for Roku App: Install it onto your Roku to stream files from your Mezzmo library. Full details at http://www.mezzmo.com/wiki/doku.php?...oku_user_guide
    Wiki: User Guides & Reference Manual at http://www.mezzmo.com/wiki
    Facebook: http://www.facebook.com/Mezzmo.DLNA.Server
    Twitter: https://twitter.com/conceiva_mezzmo
    Web: http://www.mezzmo.com

  3. #3
    Join Date
    Jan 2012
    Location
    Uk
    Posts
    92

    Default

    Hi, thanks, i have asked panasonic for details of what the bt230 can play but my big problem at the moment is mezzmo confusing my tv up with my blu-ray player.

    They are both running from ther same wireless n bridge/repeater (hard wired) and mezzmo can see both dynamic ip adresses but mixes them up as it only sees the one mac address which is the bridge, not the device, any ideas why, it it this which it uses to identify a device?

    Basic setup is Home PC is the server, wireless n linked to main home internet hub / wireless router, wirelessly linked to wireless bridge/repeater, bridge working as 4 port switch feeding TV and blu-ray player and ongoing to other wireless devices not within range of main router.

    If i delete all devices and tell mezzmo to use ip i can separate the tv & blu-ray out and i will start to test the profiles but at the moment it seems to transcode all formats and the result is very choppy. The tv on exactly the same set up plays the same test files perfectly now (thanks to dennis and a new profile - Pansanoic Viera - No MPEG TS).

    I will test all panasonic options (excluding viera) first.

    What i really need to do is fix some ip addresses but leave the rest dynamic, or tell mezzmo or the network what the correct mac address is as i dont want my other devices with fixed ip, it seems an all or nothing setting, any advice?

    Thanks

    Steve

  4. #4
    Join Date
    Nov 2007
    Location
    Melbourne, Australia
    Posts
    11,646

    Default

    Two things you can do when your devices are behind a bridge:

    1. Check if your router/bridge has 'MAC forwarding' or 'MAC pass through' settings. If it does, then configure it so that MAC addresses of devices connected to it are passed through.
    2. If your router/bridge is not configurable, then go to the Media Devices dialog in Mezzmo and check the 'Use only IP addresses to identify devices' checkbox and make sure you have static IP assigned for your devices. Delete all devices in the Media Devices dialog and stop/start your Mezzmo server. That should populate the Media Devices dialog with the DLNA devices in your home (assuming they are turned on). Check that the device profiles are right, and then start streaming files to check all is OK.


    Let us know if you still have problems.

    Mezzmo Android: Install it on your tablet, smartphone, Android TV or Amazon Fire to browse and stream files from your Mezzmo library to all your devices. Full details at http://www.conceiva.com/products/mez...mo_android.asp
    Mezzmo for Kodi Add-on: Install it into Kodi to stream files from your Mezzmo library directly in Kodi. Full details at http://www.mezzmo.com/wiki/doku.php?...odi_user_guide
    Mezzmo for Roku App: Install it onto your Roku to stream files from your Mezzmo library. Full details at http://www.mezzmo.com/wiki/doku.php?...oku_user_guide
    Wiki: User Guides & Reference Manual at http://www.mezzmo.com/wiki
    Facebook: http://www.facebook.com/Mezzmo.DLNA.Server
    Twitter: https://twitter.com/conceiva_mezzmo
    Web: http://www.mezzmo.com

Similar Threads

  1. Panasonic TX-P42V10B
    By Roofus in forum Mezzmo Questions and Support
    Replies: 19
    Last Post: 04-23-2012, 09:54 AM
  2. Help Panasonic G30
    By alvesricardo in forum Mezzmo Questions and Support
    Replies: 3
    Last Post: 03-16-2012, 09:03 AM
  3. Panasonic tx-p42g30y + .srt + .mkv
    By boneslammer in forum Mezzmo Questions and Support
    Replies: 10
    Last Post: 02-29-2012, 06:27 PM
  4. Panasonic DMP-BDT210 and mp4
    By javovo in forum Mezzmo Questions and Support
    Replies: 1
    Last Post: 11-21-2011, 08:50 AM
  5. Panasonic TX-L37D25E
    By Stephan in forum Mezzmo Questions and Support
    Replies: 28
    Last Post: 08-05-2010, 08:34 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •