samsung LA32D550 and transcoding

[waleed_hanafy]

hi mezzmo team from Egypt
first i would like to thank you for this great software and also great support i see in your forum
i have PC with core2quad processor and 2 GB ram
i have the latest version trial for mezzmo 2.7.1
i also have Samsung TV la32d550
the first question i have for you
-- my TV capable of playing rmvb natively i.e without transcoding(i know that from all share software and others dlna server like serviio) so i want to edit Samsung D profile to send rmvb files without transcoding them i .e what to wite in the profile
the second question is some time a skip to the next video happen it's random but always occur without any notification is there somethimg wrong with my setup note i edited the connection type to Ethernet cable (100 mb ) in the device settings
thanks in advance again

[waleed_hanafy]

forget to mention that when i played this rmvb file it always skip to next track after 20-30 seconds


the information of the file as follows


General
Complete name : F:\هارد3\أفلام عربي\Afwah.We.Araneb.1977.RMVB.rmvb
Format : RealMedia
File size : 691 MiB
Duration : 1h 45mn
Overall bit rate : 895 Kbps

Video
ID : 1
Format : RealVideo 4
Codec ID : RV40
Codec ID/Info : Based on AVC (H.264), Real Player 9
Duration : 1h 45mn
Bit rate : 831 Kbps
Width : 720 pixels
Height : 576 pixels
Display aspect ratio : 5:4
Frame rate : 25.000 fps
Standard : PAL
Bits/(Pixel*Frame) : 0.080
Stream size : 626 MiB (91%)

Audio
ID : 0
Format : Cooker
Codec ID : cook
Codec ID/Info : Based on G.722.1, Real Player 6
Duration : 1h 45mn
Bit rate : 64.1 Kbps
Channel(s) : 2 channels
Sampling rate : 44.1 KHz
Bit depth : 16 bits
Stream size : 48.3 MiB (7%)

so my point as my TV supports rmvb natively why should i trans-code it

[waleed_hanafy]

i added these lines to samsung D profile and then restarted the server


<avcontainer id="rm" name="rmvb" encode="0" mimetype="video/rmvb">
<video>
<format id="rv40" encode="0">
</format>
</video>
<audio>
<format id="cook" encode="0">
</format>
</audio>
<audio>
<format id="aac" encode="0">
</format>
</audio>
</avcontainer>

and TV gives me not supported format although all other dlna servers just send the rmvb file natively and didn't trans-code it

[Paul]

Please post the FFmpeg information on the RMVB file that is natively supported by your TV. To do this, right-click on the video in Mezzmo and click 'Get FFmpeg Information'. Once we get this,we will modify the Samsung D device profile for you.

[waleed_hanafy]

thanks Paul for your answer here it is my FFmpeg info hope it can help


ffmpeg version N-47062-g26c531c Copyright (c) 2000-2012 the FFmpeg developers
built on Nov 25 2012 12:21:26 with gcc 4.7.2 (GCC)
configuration: --enable-gpl --enable-version3 --disable-pthreads --enable-runtime-cpudetect --enable-avisynth --enable-bzlib --enable-frei0r --enable-libass --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libnut --enable-libopenjpeg --enable-libopus --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libutvideo --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-libxvid --enable-zlib
libavutil 52. 9.100 / 52. 9.100
libavcodec 54. 77.100 / 54. 77.100
libavformat 54. 37.100 / 54. 37.100
libavdevice 54. 3.100 / 54. 3.100
libavfilter 3. 23.102 / 3. 23.102
libswscale 2. 1.102 / 2. 1.102
libswresample 0. 17.101 / 0. 17.101
libpostproc 52. 2.100 / 52. 2.100
[rm @ 01f6ac40] Invalid stream index 2 for index at pos 724752429
Input #0, rm, from 'F:\هارد3\أفلام عربي\Afwah.We.Araneb.1977.RMVB.rmvb':
Metadata:
title :
author :
copyright :
comment :
ASMRuleBook : #($Bandwidth >= 0),Stream0Bandwidth = 64082, Stream1Bandwidth = 385918;
Audiences : Easy RealMedia Tool's Audience;
audioMode : music
Creation Date : 1/2/2012 7:18:17
Description : This File is Created by Easy RealMedia Tools@!
Email : rick@redcheek.net
Generated By : Easy RealMedia Tools V1.8x
HomeWeb : http://redcheek.net
Keywords :
Modification Date: 1/2/2012 7:18:17
videoMode : normal
Duration: 01:45:19.54, start: 0.000000, bitrate: 917 kb/s
Stream #0:0: Audio: cook (cook / 0x6B6F6F63), 44100 Hz, stereo, fltp, 64 kb/s
Stream #0:1: Video: rv40 (RV40 / 0x30345652), yuv420p, 720x576, 830 kb/s, 25 fps, 25 tbr, 1k tbn, 1k tbc
At least one output file must be specified


---> DB Level Info: -99, -99
---> Frame rate: 25.00
---> Aspect ratio:


thanks in advance

[waleed_hanafy]

there is a small note Paul
when i pre transcode this file with mpeg and mpeg2 video channels and ac3 audio channels formats every thing works perfect i waited till pretranscode reaches about 80% and played the film on my tv and every thing works graet starnge isn't it?

after that i got the info for the converted file as follows
General
Complete name : C:\Users\waleed\AppData\Local\Conceiva\Mezzmo\Tran scodingFiles\C73231BA-484C-4ab6-A549-1EF2B3F3FBFB\Video\378-mpeg-mpeg2video-ac3.mzt
Format : MPEG-PS
File size : 727 MiB
Duration : 13mn 46s
Overall bit rate mode : Variable
Overall bit rate : 7 375 Kbps

Video
ID : 224 (0xE0)
Format : MPEG Video
Format version : Version 2
Format profile : Main@Main
Format settings, BVOP : No
Format settings, Matrix : Default
Format settings, GOP : M=1, N=12
Duration : 13mn 46s
Bit rate mode : Variable
Bit rate : 6 780 Kbps
Maximum bit rate : 15.0 Mbps
Width : 720 pixels
Height : 576 pixels
Display aspect ratio : 5:4
Frame rate : 25.000 fps
Standard : PAL
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.654
Stream size : 668 MiB (92%)

Audio
ID : 189 (0xBD)-128 (0x80)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Muxing mode : DVD-Video
Duration : 13mn 46s
Bit rate mode : Constant
Bit rate : 448 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Delay relative to video : 59ms
Stream size : 44.1 MiB (6%)

this works well on my device so if you please i need two things
1-i want to watch rmvb natively on my tv
2-i want to transcode all non-native formats to the above mpeg-ps format that worked well after pretranscoding

[waleed_hanafy]

note2 when i used the SonyBraviaKDLW profile the file worked well but all my avi and mkvs transcoded

[Peter]

Hi,
we tried streaming rmvb files to our Samsung D here using Serviio and All Share and both reported that the file formats were not supported, so it is probable that these servers were transcoding the files to another format so that it plays on the device. You can try editing the Samsung D profile to change the preferred transcoding format from matroska to mpeg, look for the following line in the profile:

<avcontainer id="matroska" name="matroska,webm" encode="1" mimetype="video/x-mkv" dlnaprofile="MKV" preferredtranscoded="1" format="matroska" supportschunked="0" level="41">

Change preferredtranscoded="1" to preferredtranscoded="0" and then look for this line in the profile:

<avcontainer id="mpeg" name="mpeg" encode="1" mimetype="video/mpeg" baseline="1" dlnaprofile="MPEG_PS_PAL,MPEG_PS_NTSC" format="vob" supportschunked="0">

Add preferredtranscoded="1" to the attributes so that it becomes:

<avcontainer id="mpeg" name="mpeg" encode="1" mimetype="video/mpeg" baseline="1" dlnaprofile="MPEG_PS_PAL,MPEG_PS_NTSC" preferredtranscoded="1" format="vob" supportschunked="0">

and then save the file and restart your Mezzmo server, your rmvb files will be transcoded to mpeg when played on the fly.

[waleed_hanafy]

didn't work gave me unsupported format
regarding rmvb i used all share and ps3 server and all play rmvb files without transcoding because in ps3 server settings i put rmvb in formats not to transcode i tried serviio before but it didn't support rmvb at all i will try it now and inform you
thanks for your patience
note when i used the SonyBraviaKDLW profile the same file will play strange isn't it?

[waleed_hanafy]

the file now works natively i added these files to samsung D profile

<avcontainer id="rm" name="rmvb" encode="0" mimetype="application/vnd.rn-realmedia-vbr" supportschunked="0">
<video>
<format id="RV40" encode="0">
</format>
</video>
<audio>
<format id="cook" encode="0">
</format>
</audio>
</avcontainer>

thanks for this great software also i can seek in and out in rmvb