Results 1 to 8 of 8

Thread: Panasonic Viera ET60 series profile

  1. #1
    Join Date
    Dec 2013
    Location
    Netherlands
    Posts
    2

    Default Panasonic Viera ET60 series profile

    Hi there, i recently purchased mezzmo and I really like the software . I only seem to have a problem determining which profile to choose for my TV. I have a Panasonic Viera TX-L42ET60 (passive 3D tv).

    So far I tried every panasonic vierra profile available in mezzmo, but none of them seem to work the way I want it to work.

    The best profile I tried so far is "Panasonic Vierra 2013" models. But with the default settings mezzmo is transcoding many files that are not necessary to be transcoded. I have to uncheck the 'Transcode incompatable media files so they can be played on the device' option to stop this from happening. This way my TV plays almost every file, even with external subtitles.

    I tried to play lots of different video files, but the only ones that do not seem to work with transcoding off are the ones with the DX50 (divx) codec, both .avi, .mp4 or .mkv. So for these files I want mezzmo to transcode them for me. Only when I check 'Transcode incompatable media files so they can be played on the device' again, ALL of my .avi files are transcoded and other formats too, even though they worked just fine earlier. Besides that I am losing the sound on these transcoded files with this particular profile, probably because mezzmo is saying under format: + mpegts (+ h264, -mp3). If I want sound on these files to be transcoded I have to go to another profile like "Panasonic Viera 2011" or "Panasonic Viera 3D (no divx)" and then it says format +mpegts (+h264, +ac3) and works fine.

    My feeling says I need the "Panasonic Viera 2013" profile, but to only convert the files with divx codec, and to transcode those files withouth losing the sound somehow.

    What do you think could I be right here? And is it possible to have another profile or maybe change it myself?

    Thanks in advance. Peter

  2. #2
    Join Date
    Nov 2007
    Location
    Melbourne, Australia
    Posts
    11,642

    Default

    Hi Peter,

    Please email us at support [at] conceiva [dot] com and we'll create a new device profile for you. In your email, include the FFmpeg information for files that play natively on your TV and FFmpeg information for files that do not play natively on your TV. This will help us create the correct device profile.

    Mezzmo Android: Install it on your tablet, smartphone, Android TV or Amazon Fire to browse and stream files from your Mezzmo library to all your devices. Full details at http://www.conceiva.com/products/mez...mo_android.asp
    Mezzmo for Kodi Add-on: Install it into Kodi to stream files from your Mezzmo library directly in Kodi. Full details at http://www.mezzmo.com/wiki/doku.php?...odi_user_guide
    Mezzmo for Roku App: Install it onto your Roku to stream files from your Mezzmo library. Full details at http://www.mezzmo.com/wiki/doku.php?...oku_user_guide
    Wiki: User Guides & Reference Manual at http://www.mezzmo.com/wiki
    Facebook: http://www.facebook.com/Mezzmo.DLNA.Server
    Twitter: https://twitter.com/conceiva_mezzmo
    Web: http://www.mezzmo.com

  3. #3
    Join Date
    Dec 2013
    Location
    Netherlands
    Posts
    2

    Default

    Thanks Paul for your quick reply and helping out!

    I have send the email with the FFmpeg information. I probably don't have all the information because there are so many types of files and codecs, but I think I got the most important information covered.

  4. #4
    Join Date
    Nov 2007
    Location
    Melbourne, Australia
    Posts
    11,642

    Default

    Thanks - we'll use this to create a device profile. We'll get back to you via email when it is ready.

    Mezzmo Android: Install it on your tablet, smartphone, Android TV or Amazon Fire to browse and stream files from your Mezzmo library to all your devices. Full details at http://www.conceiva.com/products/mez...mo_android.asp
    Mezzmo for Kodi Add-on: Install it into Kodi to stream files from your Mezzmo library directly in Kodi. Full details at http://www.mezzmo.com/wiki/doku.php?...odi_user_guide
    Mezzmo for Roku App: Install it onto your Roku to stream files from your Mezzmo library. Full details at http://www.mezzmo.com/wiki/doku.php?...oku_user_guide
    Wiki: User Guides & Reference Manual at http://www.mezzmo.com/wiki
    Facebook: http://www.facebook.com/Mezzmo.DLNA.Server
    Twitter: https://twitter.com/conceiva_mezzmo
    Web: http://www.mezzmo.com

  5. #5
    Join Date
    Jan 2012
    Posts
    53

    Default

    Hi,

    I'm having a similar problem with my ET60.

    I can get pretty much all of my video files to work using the Panasonic Viera (2011 models. DTS) profile, however 99% of my audio files (ie music, not movie soundtracks) hang for about 2 minutes before they play - no transcoding is taking place, I just get a spinning circle on the TV. If I check Mezzmo, it says the file is streaming. If I switch to the 2012 or 2013 profiles, then the audio files play instantly but a large number of the video files no longer play properly.

    I've done some investigation, and the audio files that hang are m4a files, sample rate of 44.1khz and bitrate of around 125kb/s. The files that do play instantly have 48kHz sample rates and 165kb/s bitrates

    I've had a look at both profiles, and both seem to support 44.1kHz sample rates. Is it possible to create a hybrid profile that has the video settings of 2011 DTS and audio of 2012/2013?

    Note - both audio and video work fine on my Panny WT50 using 2011 DTS profile.

    Thanks

    P
    Last edited by Pootle; 01-27-2014 at 07:19 PM.

  6. #6
    Join Date
    Nov 2007
    Location
    Melbourne, Australia
    Posts
    11,642

    Default

    Hi Pootle,

    Given your ET60 is a 2013 model, then we'd like you to use the Panasonic Viera TV (2013 models) device profile and we'll tweak it to work for your video files.

    Please email us at support [at] conceiva [dot] com and we'll provide an updated Panasonic Viera TV (2013 models) device profile. In your email, please provide the FFmpeg information for the video files that do not play on your ET60. That will help us adjust the device profile.
    Last edited by Paul; 01-28-2014 at 12:16 PM. Reason: typo

    Mezzmo Android: Install it on your tablet, smartphone, Android TV or Amazon Fire to browse and stream files from your Mezzmo library to all your devices. Full details at http://www.conceiva.com/products/mez...mo_android.asp
    Mezzmo for Kodi Add-on: Install it into Kodi to stream files from your Mezzmo library directly in Kodi. Full details at http://www.mezzmo.com/wiki/doku.php?...odi_user_guide
    Mezzmo for Roku App: Install it onto your Roku to stream files from your Mezzmo library. Full details at http://www.mezzmo.com/wiki/doku.php?...oku_user_guide
    Wiki: User Guides & Reference Manual at http://www.mezzmo.com/wiki
    Facebook: http://www.facebook.com/Mezzmo.DLNA.Server
    Twitter: https://twitter.com/conceiva_mezzmo
    Web: http://www.mezzmo.com

  7. #7
    Join Date
    Jan 2012
    Posts
    53

    Default

    Thanks Paul - I'll get the files together and email them over to you. Hope you got a chance to celebrate over the weekend?

  8. #8
    Join Date
    Nov 2007
    Location
    Melbourne, Australia
    Posts
    11,642

    Default

    Thanks, Pootle. (Yes, certainly did celebrate - we love a long weekend down under )

    Mezzmo Android: Install it on your tablet, smartphone, Android TV or Amazon Fire to browse and stream files from your Mezzmo library to all your devices. Full details at http://www.conceiva.com/products/mez...mo_android.asp
    Mezzmo for Kodi Add-on: Install it into Kodi to stream files from your Mezzmo library directly in Kodi. Full details at http://www.mezzmo.com/wiki/doku.php?...odi_user_guide
    Mezzmo for Roku App: Install it onto your Roku to stream files from your Mezzmo library. Full details at http://www.mezzmo.com/wiki/doku.php?...oku_user_guide
    Wiki: User Guides & Reference Manual at http://www.mezzmo.com/wiki
    Facebook: http://www.facebook.com/Mezzmo.DLNA.Server
    Twitter: https://twitter.com/conceiva_mezzmo
    Web: http://www.mezzmo.com

Similar Threads

  1. Panasonic Viera GT30 Profile
    By Crafty in forum Mezzmo Questions and Support
    Replies: 1
    Last Post: 07-16-2013, 12:30 PM
  2. Subtite on Panasonic Viera
    By kiborgas in forum Mezzmo Questions and Support
    Replies: 1
    Last Post: 02-08-2013, 08:44 AM
  3. Panasonic Viera Lcd 32 ..profile
    By badolm in forum Mezzmo Questions and Support
    Replies: 6
    Last Post: 02-20-2012, 09:22 AM
  4. Panasonic Viera GT30 series support
    By baletka in forum Mezzmo Questions and Support
    Replies: 4
    Last Post: 01-30-2012, 11:05 AM
  5. Panasonic Viera V Series
    By Mike250 in forum Mezzmo Questions and Support
    Replies: 2
    Last Post: 09-06-2010, 08:42 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •