Results 1 to 2 of 2

Thread: New profile for Panasonic Viera no longer plays MPEG2-TS

  1. #1

    Question New profile for Panasonic Viera no longer plays MPEG2-TS

    Hi!

    I've just upgraded to v4.0.6.0 and apart from a few niggles during the update we're loving it. The ability to restrict the TV to only showing kid-friendly rated stuff during daylight ours is very timely (TreeFu Tom fine for a 3 year old just discovering how to press buttons, Sin City is not such a good idea...).

    But we've seen some interesting changes too. The TV is now recognised as a Viera E30 SeriesA and was assigned the Panasonic Viera (2012 models) profile. This means everything we've previously converted to MP4 is now reported as MKV files, but the random skip on pause has gone, which is great. Transcode speed is still very good (once all old transcodes were deleted and preferences reset) so no worries there.

    But for home video, which used to play as MPEG2-TS files, there is an long delay of several minutes even for a 1 minute clip, which the TV eventually interprets as unable to play file. Once the transcoding has finished the clips are playable, but the first several seconds are in shades of green and purple and very blockly. Some might say they're better for that of course.

    I've found a workaround of changing the profile to just Panasonic Viera, which makes it all work as before, ie MPEG2-TS or MP4 as appropriate, but also brings back the random skipping when paused. I guess there's not much else I can do immediately?

    FFMPEG info for one of the camera files:
    ffmpeg version N-59793-g7a8318f Copyright (c) 2000-2014 the FFmpeg developers
    built on Jan 16 2014 16:39:38 with gcc 4.8.2 (GCC)
    configuration: --enable-memalign-hack --arch=x86 --target-os=mingw32 --cross-prefix=i686-w64-mingw32- --enable-static --disable-shared --enable-zlib --disable-postproc --prefix=/home/peter/ffmpeg/build/gpl32 --enable-libmp3lame --enable-libx264 --enable-gpl --extra-libs='-lx264 -lpthread' --enable-pthreads --enable-runtime-cpudetect --extra-cflags=-I/home/peter/cc32/include --extra-ldflags=-L/home/peter/cc32/lib --pkg-config=pkg-config --disable-w32threads --enable-zlib --enable-libvpx --enable-libvorbis
    libavutil 52. 62.100 / 52. 62.100
    libavcodec 55. 48.101 / 55. 48.101
    libavformat 55. 23.103 / 55. 23.103
    libavdevice 55. 5.102 / 55. 5.102
    libavfilter 4. 1.100 / 4. 1.100
    libswscale 2. 5.101 / 2. 5.101
    libswresample 0. 17.104 / 0. 17.104
    Input #0, mpegts, from '\\Rachael\video\20140601_141934.m2ts':
    Duration: 00:01:03.84, start: 0.841589, bitrate: 12730 kb/s
    Program 1
    Stream #0:0[0x1011]: Video: h264 (High) (HDMV / 0x564D4448), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], 25 fps, 25 tbr, 90k tbn, 50 tbc
    Stream #0:1[0x1100]: Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, stereo, fltp, 256 kb/s
    Stream #0:2[0x1200]: Subtitle: hdmv_pgs_subtitle ([144][0][0][0] / 0x0090), 1920x1080
    At least one output file must be specified

    <MEZZMO>: Child process ended with code: 109, ExitCode=1


    ---> DB Level Info: 40, 100
    ---> Frame rate: 25.00
    ---> Aspect ratio: 16:9 PAR=1:1
    ---> Duration: 00:01:03

    TV model: Panasonic TX-L37E30B

    Cheers!
    -Richard

  2. #2
    Join Date
    Nov 2007
    Location
    Melbourne, Australia
    Posts
    11,616

    Default

    Hi Richard,

    Try this: Go to the Media Devices dialog and edit your TV. Change the device profile to back to the "Panasonic Viera (2012 models)" device profile. Also, go to the Transcoding tab on the Device Settings dialog for your TV and turn off transcoding. Now try and stream the M2TS file to your TV. Mezzmo will stream the file to your TV without transcoding. If it plays, then it tells us that this format is supported by your TV. In this case, email us at support [at] conceiva [dot] com and we'll provide a tweaked device profile.

    Mezzmo Android: Install it on your tablet, smartphone, Android TV or Amazon Fire to browse and stream files from your Mezzmo library to all your devices. Full details at http://www.conceiva.com/products/mez...mo_android.asp
    Mezzmo for Kodi Add-on: Install it into Kodi to stream files from your Mezzmo library directly in Kodi. Full details at http://www.mezzmo.com/wiki/doku.php?...odi_user_guide
    Mezzmo for Roku App: Install it onto your Roku to stream files from your Mezzmo library. Full details at http://www.mezzmo.com/wiki/doku.php?...oku_user_guide
    Wiki: User Guides & Reference Manual at http://www.mezzmo.com/wiki
    Facebook: http://www.facebook.com/Mezzmo.DLNA.Server
    Twitter: https://twitter.com/conceiva_mezzmo
    Web: http://www.mezzmo.com

Similar Threads

  1. Panasonic Viera ET60 series profile
    By pbeerens in forum Mezzmo Questions and Support
    Replies: 7
    Last Post: 01-28-2014, 12:18 PM
  2. Panasonic Viera GT30 Profile
    By Crafty in forum Mezzmo Questions and Support
    Replies: 1
    Last Post: 07-16-2013, 12:30 PM
  3. Replies: 6
    Last Post: 05-28-2013, 05:55 PM
  4. Samsung C6750 no longer sees any MPEG2 video files after 2.6.4 upgrade
    By BeFi in forum Mezzmo Questions and Support
    Replies: 19
    Last Post: 07-25-2012, 09:22 AM
  5. Panasonic Viera Lcd 32 ..profile
    By badolm in forum Mezzmo Questions and Support
    Replies: 6
    Last Post: 02-20-2012, 09:22 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •