Results 1 to 4 of 4

Thread: Hisense profile? Generic NTSC crashes TV

  1. #1
    Join Date
    Oct 2014
    Posts
    2

    Default Hisense profile? Generic NTSC crashes TV

    I have a 40" HISENSE 40H5 wireless TV and although I can stream youtube pretty good the mezzmo media server really struggles to deliver anything to it. the tv always shows 88-100% signal strength but even streaming video files that are 11-12 minutes long 480p and 60MB in size, the TV will stutter, skip, freeze, and usually will just lose contact with mezzmo and everything will have to be started over again.

    Is there another profile for any other tv that would equal a profile for this TV? mezzmo always assigns it the generic ntsc profile.

    streaming anything that is 720p or 1080p is out of the question, typically the tv will completely lose mezzmo and often times I will need to restart mezzmo for it to show up again on the TV's list of devices. mezzmo delivers and transcodes everything great to my 2 other TV's, xbox 360, 2 computers and Panasonic bluray player. but mezzmo also has a profile assigned to those devices. the hisense 40H5 is listed as generic ntsc so I am wondering if that could be causing the issue?

    I am streaming from a trendnet tew-812dru ac1750 wireless router from files stored on a pc with a 3970X extreme processor & 32gb ram, so transcoding and delivery are not an issue especially since there are no other devices using mezzmo while I try to stream to this tv,

    I am open to any suggestions because this is the one tv I actually have to stream to since it is nowhere near a cable or ethernet connection.

    I have tried versions from 3.4.4 to 4.06 and I have also just updated the TV's firmware, no luck

    like I said I can stream a 1080p youtube video that is 5 minutes long and 100MB but I can't get mezzmo to deliver a 10 or 15 minute video that's half that size without freezing, buffering, or mezzmo cutting off and anything larger usually won't even play for 5 seconds without totally freezing up.

  2. #2
    Join Date
    Nov 2007
    Location
    Melbourne, Australia
    Posts
    11,616

    Default

    Do you know the supported video, music and photo formats for your TV? Check the manual to see if you can find this. Post that here and then we can recommend a device profile.

    Mezzmo Android: Install it on your tablet, smartphone, Android TV or Amazon Fire to browse and stream files from your Mezzmo library to all your devices. Full details at http://www.conceiva.com/products/mez...mo_android.asp
    Mezzmo for Kodi Add-on: Install it into Kodi to stream files from your Mezzmo library directly in Kodi. Full details at http://www.mezzmo.com/wiki/doku.php?...odi_user_guide
    Mezzmo for Roku App: Install it onto your Roku to stream files from your Mezzmo library. Full details at http://www.mezzmo.com/wiki/doku.php?...oku_user_guide
    Wiki: User Guides & Reference Manual at http://www.mezzmo.com/wiki
    Facebook: http://www.facebook.com/Mezzmo.DLNA.Server
    Twitter: https://twitter.com/conceiva_mezzmo
    Web: http://www.mezzmo.com

  3. #3
    Join Date
    Oct 2014
    Posts
    2

    Default supported formats

    the manual states it exactly like this:

    Video:
    .avi (h.264, MPEG, Divx) .mkv (h.264, MPEG) .flv, .mpeg, .wmv, (Divx, Xvid)

    Photo:
    .jpg

    Music:
    .avi (mp3, mpeg, ac3) .mp4, .rm

    NOTE, we cannot promise the unit will support all of these formats listed above as the programming tools may be different.


    so that seems like a pretty indefinite list of formats to me
    Last edited by dakapc; 10-02-2014 at 05:13 PM. Reason: found more info

  4. #4
    Join Date
    Nov 2007
    Location
    Melbourne, Australia
    Posts
    11,616

    Default

    OK - thanks. Email us at support [at] conceiva [dot] com and we'll provide you with a new device profile that supports this Hisense model.

    Mezzmo Android: Install it on your tablet, smartphone, Android TV or Amazon Fire to browse and stream files from your Mezzmo library to all your devices. Full details at http://www.conceiva.com/products/mez...mo_android.asp
    Mezzmo for Kodi Add-on: Install it into Kodi to stream files from your Mezzmo library directly in Kodi. Full details at http://www.mezzmo.com/wiki/doku.php?...odi_user_guide
    Mezzmo for Roku App: Install it onto your Roku to stream files from your Mezzmo library. Full details at http://www.mezzmo.com/wiki/doku.php?...oku_user_guide
    Wiki: User Guides & Reference Manual at http://www.mezzmo.com/wiki
    Facebook: http://www.facebook.com/Mezzmo.DLNA.Server
    Twitter: https://twitter.com/conceiva_mezzmo
    Web: http://www.mezzmo.com

Similar Threads

  1. Fast Forward using Generic Device NTSC
    By koeiseun in forum Mezzmo Questions and Support
    Replies: 0
    Last Post: 08-14-2013, 01:45 PM
  2. NTSC or NTSC, No DivX? That is the question...
    By lopicma in forum Mezzmo Questions and Support
    Replies: 1
    Last Post: 01-30-2012, 12:30 PM
  3. LG BD670 bluray player seen as generic
    By seeker in forum Mezzmo Questions and Support
    Replies: 23
    Last Post: 08-01-2011, 09:03 AM
  4. LG DB660 seen as generic no cover art/thumbnails
    By mateysz in forum Mezzmo Questions and Support
    Replies: 1
    Last Post: 07-28-2011, 09:17 AM
  5. which profile to use on Hisense Streamer?
    By blastman in forum Mezzmo Questions and Support
    Replies: 8
    Last Post: 02-18-2011, 05:32 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •