Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Link XBMC to Mezzmo

  1. #1
    Join Date
    Mar 2011
    Posts
    17

    Default Link XBMC to Mezzmo

    I am able to connect XBMC to particular folders within my Mezzmo library. My problem is the the connection goes stale in the event my Mezzmo host is rebooted. I then have to link XBMC back to the folder. On XBMC, I see the UPNP path keeps changing... Question, Is there any way to generate a static UPNP path for mezzmo so I do not have to keep mapping the folder?

  2. #2
    Join Date
    Apr 2012
    Posts
    88

    Default

    Should be fine if you assign a static IP to your computer. I have done this and it has worked fine.

    Hope that helps.

    Edit: I should elaborate, I have assigned a static IP to both the computer running XBMC and the computer that is hosting Mezzmo.
    Last edited by Hashybot; 10-28-2014 at 04:55 AM.

  3. #3
    Join Date
    Mar 2011
    Posts
    17

    Default

    I have it setup as dynamic IP on my router but I have reserved/locked all of my devices including my workstation hosting Mezzmo on the router. It is my understanding that those devices will always land under those IP addresses. Am I wrong in thinking that or should I simply switch the whole router over to static IP?

    BTW... Thanks in advance.

    Jason

  4. #4
    Join Date
    Apr 2012
    Posts
    88

    Default

    You are correct. Just the devices on your network are fine.

  5. #5
    Join Date
    Mar 2011
    Posts
    17

    Default

    Still struggling with this one... From where I am sitting, it looks like when I start Mezzmo, it is given a unique ID/UID. I also have Serviio installed on the same workstation as Mezzmo to compare and here is what I see. When I look for UPNP devices on XBMC, I see "Serviio" and I also see "Mezzmo:1" (Which tells me it is like an instance of mezzmo rather than just mezzmo). If I map both of them... then restart the workstation, Serviio stays mapped under the address I connected too, however Mezzmo looses the connection and must be reconnected. The IP adresses do not change on the server side or the client (XBMC).

  6. #6
    Join Date
    Apr 2012
    Posts
    88

    Default

    It could possibly be a conflict with Serviio and Mezzmo being installed on the same server Jason. I run Mezzmo from my upstairs PC (hardwired) with a static IP, I also run XBMC downstairs with a static IP (which recieves Mezzmo) and this works fine. Have you tried turning off Serviio and seeing what happens? If not it might be worth waiting to see what Paul suggests on this one.

  7. #7
    Join Date
    Nov 2007
    Location
    Melbourne, Australia
    Posts
    11,639

    Default

    Hi Jason,

    Mezzmo server creates a separate UUID for each network adaptor on your computer and can communicate/stream to DLNA devices using all these network adaptors. The UUID is tied to the MAC address of the network adaptor, so the UUIDs should not be changing each time you run Mezzmo server or restart your computer - unless the MAC addresses of your network adaptors are changing for some reason.

    If you have several network adaptors on your computer, then you can restrict Mezzmo server to communicate with your DLNA device (e.g. XMBC) on a certain network adaptor. Go to the Media Devices dialog and edit your device. On the Device Settings dialog, change the Network adaptor setting from 'Automatic' (meaning all adaptors) to your desired network adaptor. This may help remove the ":1" from the Mezzmo server name in XBMC.

    Mezzmo Android: Install it on your tablet, smartphone, Android TV or Amazon Fire to browse and stream files from your Mezzmo library to all your devices. Full details at http://www.conceiva.com/products/mez...mo_android.asp
    Mezzmo for Kodi Add-on: Install it into Kodi to stream files from your Mezzmo library directly in Kodi. Full details at http://www.mezzmo.com/wiki/doku.php?...odi_user_guide
    Mezzmo for Roku App: Install it onto your Roku to stream files from your Mezzmo library. Full details at http://www.mezzmo.com/wiki/doku.php?...oku_user_guide
    Wiki: User Guides & Reference Manual at http://www.mezzmo.com/wiki
    Facebook: http://www.facebook.com/Mezzmo.DLNA.Server
    Twitter: https://twitter.com/conceiva_mezzmo
    Web: http://www.mezzmo.com

  8. #8
    Join Date
    Mar 2011
    Posts
    17

    Default

    One thing I did find interesting the other day is that I mapped a music playlist in Mezzmo and for some reason, this one appears to hold, meaning I can connect each and evey time. I also mapped the music folder and this one I have to keep remapping. I will play around with this some more and try the settings you suggested. Stay tuned...

  9. #9
    Join Date
    Nov 2007
    Location
    Melbourne, Australia
    Posts
    11,639

    Default

    OK - let us know what you find. Once you nail down the problem, we'll reproduce it here and fix it up for you.

    Mezzmo Android: Install it on your tablet, smartphone, Android TV or Amazon Fire to browse and stream files from your Mezzmo library to all your devices. Full details at http://www.conceiva.com/products/mez...mo_android.asp
    Mezzmo for Kodi Add-on: Install it into Kodi to stream files from your Mezzmo library directly in Kodi. Full details at http://www.mezzmo.com/wiki/doku.php?...odi_user_guide
    Mezzmo for Roku App: Install it onto your Roku to stream files from your Mezzmo library. Full details at http://www.mezzmo.com/wiki/doku.php?...oku_user_guide
    Wiki: User Guides & Reference Manual at http://www.mezzmo.com/wiki
    Facebook: http://www.facebook.com/Mezzmo.DLNA.Server
    Twitter: https://twitter.com/conceiva_mezzmo
    Web: http://www.mezzmo.com

  10. #10
    Join Date
    Mar 2011
    Posts
    17

    Default

    Paul,

    I made the suggested changes (change the Network adaptor setting from 'Automatic' ) and there was a glimmer of hope as the “:1” no longer showed up in the XBMC list of DLNA/UPNP devices. After restarting my PC (Mezzmo host), XBMC again lost the connection.

    Let me explain my setup and maybe there is something in there you might recognize as being the issue.

    Setup:

    • The Mezzmo host is running on Windows VISTA.
    • Router: Netgear Nighthawk X6
    • Hardwired: Running a LAN line Ethernet connection from the router to a Switch, which splits off to two more LAN line connections. One is going to my LG TV and the other is going to my Gbox (XBMC)… Which in turn, the Gbox is HDMI connected to the same LG TV.
    • Regarding the router setup, I am using dynamic IP however I have reserved certain IP addresses for the devices which hook up to Mezzmo. The reserved IP addresses on the router match 1:1 to the IP address in the list of connected devices in Mezzmo. I have even verified the IP addresses by checking each device.
    • I have also verified the MAC addresses are static and the list in Mezzmo does not change meaning the devices are not being assigned any new addresses.
    • Media Device settings: I have all three options turned on. (Allow new devices, Notify me of new devices and Use only IP address to identify devices)
    • I recently changed the Network adaptor setting from Automatic to the only other option which was a Gigabit Ethernet NIC….blah, blah. Which when I look at it from the XBMC side, the “:1” is now removed.
    • Mezzmo: I have Pictures, Video and Music all mapped to separate folders on an external drive. I also have created a Playlist which shows up on the Music side of things.
    • Mapping XBMC to Mezzmo: I have established 5 connections in total… 1-Mapping the Music folder, 2-mapping the single music playlist, 3-mapping the pictures folder, 4-mapping the video folder, 5 mapping a “New Movies” sub folder inside of the video folder. When I map each of these, it appears the first part of UPNP UID is the same for all of the mappings. After making the connections, all connections are good. After restarting my PC (Mezzmo host), only 1 of the 5 mappings holds (which is the playlist #2 mapping).
    • I never change the folder names on the Mezzmo side however the content or subfolder within is always changing.

    Hopefully this information helps… Let me know if you see something in the setup which may be causing the issue.

Similar Threads

  1. Mezzmo x D-Link DSM-320 Wireless Media Player x subtitles
    By webipsum in forum Mezzmo Questions and Support
    Replies: 3
    Last Post: 10-28-2013, 09:52 PM
  2. how to setup xbmc and mezzmo
    By oldschool in forum Mezzmo Questions and Support
    Replies: 6
    Last Post: 07-05-2013, 07:58 PM
  3. Mezzmo and XBMC nfo
    By McBrain in forum Mezzmo Questions and Support
    Replies: 1
    Last Post: 04-30-2013, 08:51 AM
  4. mezzmo displays small pictures on d-link dsm-320
    By gargiulo in forum Mezzmo Questions and Support
    Replies: 3
    Last Post: 12-05-2012, 09:52 AM
  5. Mezzmo and XBMC
    By Frank Hagan in forum Mezzmo Questions and Support
    Replies: 2
    Last Post: 05-18-2010, 09:03 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •