I suggest turning off the "Use only IP address to identify devices" checkbox in the Media Devices dialog. This checkbox should only be turned on when your devices are behind a bridge and the bridge does not have MAC forwarding - so Mezzmo always sees the bridge's MAC address for all devices behind the bridge and this make identifying devices by MAC address impossible. You mention that your MAC addresses are fine, so it should be fine to uncheck this checkbox. After unchecking this, stop your Mezzmo server and delete your devices in the Media Devices dialog. Start your Mezzmo server and your devices will be re-detected. Try steaming now to see if that is better. You may need to re-assign any specific device profiles to devices if you did that before deleting all devices. Also you may need to change the network adaptor from Automatic to your preferred network adaptor. Let us know how you go.
If no better, then it might be best to send us as set of logs and we may see what's going on. Turn on logging (see http://forum.conceiva.com/showthread...nostic-logging). Restart your Mezzmo server. Now reproduce the problem you are experiencing. Once reproduced, stop your Mezzmo server and exit Mezzmo. Zip up all the logs and email them to us at support [at] conceiva [dot] com.
Bookmarks