Results 1 to 6 of 6

Thread: Tips/Tricks to make the thumbnails and playlists load more quickly on devices

  1. #1
    Join Date
    Mar 2011
    Posts
    421

    Default Tips/Tricks to make the thumbnails and playlists load more quickly on devices

    I remember a couple of years back when I was messing with a RaspPi Model B and Kodi that it made the art load much faster if I reduced poster size to 400x600 and I was wondering if there were any other tips or tricks that I could set in my library or on Mezzmo to speed up library display. Specifically for the FireTV and FireTV Sticks, both Gen 2.

    My library is set up to only display playlists, most of them are Active Playlists. When I browse to a category it usually takes a minute or two for all of the titles and their respective thumbnails to load; I often have to sit and wait if the item I want to view is at the end of the list.

    For Example, I have an Active Playlist for TV Shows. There are 119 different shows. When I pull it up using the Mezzmo App the first page will populate with the titles and then the thumbnails will follow in about 5 seconds. If I scroll to the right too quickly, I get the "Loading...." and green <working> arrows on the thumbnails and then the titles show up after about another 5-8 seconds, followed by the thumbnails a few seconds later. Let's say that it is sorted alphabetically and I want to watch an episode of the X-Files (at the end). I can scroll all the way to the end and watch the screen full of "Loading..." and the green <working> arrow but since everything populates in order, it might take more than a minute just to get the titles to load.... and then the thumbnails.

    It seems that the pages for apps like NetFlix and Amazon Prime load much more quickly as I browse the content than does Mezzmo. The FanArt, especially, seems to be slow as molasses and there is some pretty good latency where I can switch to a different program or show and the FanArt from the previously viewed entry is still on the background and stays that way for a considerable amount of time.

    Is this due to my thumbail art being too large? Many are 400x600 and none are greater than 1000x1500. I have also compressed them down so that nothing is more than 150kb and most are 100kb or less.

  2. #2
    Join Date
    Sep 2009
    Posts
    2,677

    Default

    You could try editing the device profile for Conceiva Mezzmo (Android) and setting the size of the thumbnail to a smaller size:

    <avcontainer id="jpeg" name="jpeg_tn" mimetype="image/jpeg" encode="1" baseline="1" dlnaprofile="JPEG_TN" preferredthumbnail="1" supportschunked="0">
    <image>
    <format id="jpeg" mimetype="image/jpeg" encode="1" codec="98" quality="2">
    <maxdimensions width="320" height="320" />
    <maxbits>24</maxbits>
    </format>
    </image>
    </avcontainer>

    Currently it is 320x320 so you could try 160x160 to see if this gives better performance. We will test here to see if we can find anything in the browse request that is slowing down the response times.

    Mezzmo Android: Install it on your tablet, smartphone, Android TV or Amazon Fire to browse and stream files from your Mezzmo library to all your devices. Full details at http://www.conceiva.com/products/mez...mo_android.asp
    Mezzmo for Kodi Add-on: Install it into Kodi to stream files from your Mezzmo library directly in Kodi. Full details at http://www.mezzmo.com/wiki/doku.php?...odi_user_guide
    Mezzmo for Roku App: Install it onto your Roku to stream files from your Mezzmo library. Full details at http://www.mezzmo.com/wiki/doku.php?...oku_user_guide
    Wiki: User Guides & Reference Manual at http://www.mezzmo.com/wiki
    Facebook: http://www.facebook.com/Mezzmo.DLNA.Server
    Twitter: https://twitter.com/conceiva_mezzmo
    Web: http://www.mezzmo.com

  3. #3
    Join Date
    Oct 2016
    Posts
    26

    Default

    Couldn't you cache the thumbnails on the client to improve performance? It can be a little distracting when cycling through content as sometimes the thumbnails seem to dissapear momentarially, and then re-appear.

  4. #4
    Join Date
    Mar 2011
    Posts
    421

    Default

    Quote Originally Posted by icorrie View Post
    Couldn't you cache the thumbnails on the client to improve performance? It can be a little distracting when cycling through content as sometimes the thumbnails seem to dissapear momentarially, and then re-appear.
    That was kind of my question, too. I reduced thumbnail size but it didn't seem to make much difference. Does the size of the fanart/background make a huge difference?

  5. #5
    Join Date
    Sep 2009
    Posts
    2,677

    Default

    The thumbnails are cached but only for the current session of the app, so for the first browse the app needs to retrieve the thumbnail and put it in the cache.

    Mezzmo Android: Install it on your tablet, smartphone, Android TV or Amazon Fire to browse and stream files from your Mezzmo library to all your devices. Full details at http://www.conceiva.com/products/mez...mo_android.asp
    Mezzmo for Kodi Add-on: Install it into Kodi to stream files from your Mezzmo library directly in Kodi. Full details at http://www.mezzmo.com/wiki/doku.php?...odi_user_guide
    Mezzmo for Roku App: Install it onto your Roku to stream files from your Mezzmo library. Full details at http://www.mezzmo.com/wiki/doku.php?...oku_user_guide
    Wiki: User Guides & Reference Manual at http://www.mezzmo.com/wiki
    Facebook: http://www.facebook.com/Mezzmo.DLNA.Server
    Twitter: https://twitter.com/conceiva_mezzmo
    Web: http://www.mezzmo.com

  6. #6
    Join Date
    Sep 2009
    Posts
    2,677

    Default

    Something else you can try is to turn off folder artwork delivery in Device Settings in the Mezzmo server, go to 'Media Devices' and double-click the device and then on the Performance tab uncheck the box to deliver folder artwork.

    Mezzmo Android: Install it on your tablet, smartphone, Android TV or Amazon Fire to browse and stream files from your Mezzmo library to all your devices. Full details at http://www.conceiva.com/products/mez...mo_android.asp
    Mezzmo for Kodi Add-on: Install it into Kodi to stream files from your Mezzmo library directly in Kodi. Full details at http://www.mezzmo.com/wiki/doku.php?...odi_user_guide
    Mezzmo for Roku App: Install it onto your Roku to stream files from your Mezzmo library. Full details at http://www.mezzmo.com/wiki/doku.php?...oku_user_guide
    Wiki: User Guides & Reference Manual at http://www.mezzmo.com/wiki
    Facebook: http://www.facebook.com/Mezzmo.DLNA.Server
    Twitter: https://twitter.com/conceiva_mezzmo
    Web: http://www.mezzmo.com

Similar Threads

  1. How do I get photos to pre-load?
    By bpaulson in forum Mezzmo Questions and Support
    Replies: 2
    Last Post: 01-27-2017, 09:34 AM
  2. How to make the playlists only appear in the correct options on the device
    By Mazzola in forum Mezzmo Questions and Support
    Replies: 7
    Last Post: 05-08-2013, 01:33 AM
  3. Video screen shots for thumbnails versus DVD cover for thumbnails
    By kassysimon in forum Mezzmo Questions and Support
    Replies: 3
    Last Post: 10-08-2012, 10:29 AM
  4. Thumbnails & FFMpeg & CPU Load... Oh My!
    By ZazaBB in forum Mezzmo Questions and Support
    Replies: 9
    Last Post: 12-01-2011, 11:20 AM
  5. Resuming a download whose cookie expires quickly
    By FleetCommand in forum DownloadStudio Questions and Support
    Replies: 2
    Last Post: 12-06-2008, 04:02 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •