Results 1 to 3 of 3

Thread: Idea || Feature request

  1. #1
    Join Date
    Feb 2014
    Posts
    84

    Default Idea || Feature request

    As some of my devices of the past weren't able to play/recognize .srt INSIDE the .mkv container I decided to go over my 5.000+ movie files and extract all .srt because I found out ALL
    devices I had that time DID SUPPORT the external files.. However, only 1 .srt at a time so you couldn't select between languages. Fine for me, I just have mezzmo server to handle that.

    BUT

    Now I got this sony and it's the opposite, it only supports the .srt INSIDE the container and doesn't recognize the .srt outside as this is not "DLNA standard - which is a very old standard but very robust and thus still the standard, sadly it's not being upgraded to handle subtitles"

    So sure, you can ask mezzmo to "transcode on the fly" but that's a total overkill!!

    I don't need to transcode the video, why would I do that if the .264 standard I'm using is 100% accepted by every single device I have or any of my friends/relatives have.

    Never seen a device not supporting it.

    All it would take really, is for Mezzmo for specific devices that only support the .srt inside the container to actually stream the .mkv file as if the .srt were inside that file

    I know loading a .mkv doesn't take long, few seconds on my drives..

    on the slower drives a 4GB would take up to 30seconds on my system. But even on yet slower systems it could be done in a 2 minute timeframe.

    now WRITING THAT TO THE DISK, that might take some time, even on my M2 drives writing is always MUCH slower..

    mkvtoolnix takes 3-4 minutes to do it, including the writing to disk.

    But here is the thing, why would you do that?

    If it's for the sake of streaming, no need to write it to the disk actually.

    Just load the .mkv into the memory, load the .srt into the memory.. in the memory you put the .mkv + .srt together and you stream directly to the receiving device that needs
    the .srt inside the .mkv

    that way, all devices that need the .srt inside the container can play all the videos with the subtitles without transcoding or going over all my files AGAIN to put
    .srt back inside the container..

    basically to have everything covered you'd need all the .srt twice: inside and outside the container..

    But it HAS TO BE possible for Mezzmo to actually tweak around the mkvtoolnix sources and instead of writing the data to a file you
    just expose it to the .mkv stream to the device

    I tweaked some opensource around the mkvtoolnix myself to add/substract/strip/merge .srt files BATCH processing so I know this is possible as the software I rewrote for
    my own needs actually DOES put all the data inside the memory of the computer as a stream and then in the end after the processing (which takes a matter of seconds for a full movie)
    the actual write to disk happens (that's what really takes time) but here you never write to disk, but expose the .mkv stream to the device.


    Any chance you could add this support so all devices that CAN handle .srt inside the .mkv actually find the .srt inside?

  2. #2
    Join Date
    Sep 2009
    Posts
    2,010

    Default

    Mezzmo can embed the srt into the file while transcoding if the device profile specifies that the device only supports embedded subtitles and not external subtitles. Which profile are you currently using for your device?

    Mezzmo Android: Install it on your tablet, smartphone, Android TV or Amazon Fire to browse and stream files from your Mezzmo library to all your devices. Full details at http://www.conceiva.com/products/mez...mo_android.asp
    Mezzmo for Kodi Add-on: Install it into Kodi to stream files from your Mezzmo library directly in Kodi. Full details at http://www.mezzmo.com/wiki/doku.php?...odi_user_guide
    Mezzmo for Roku App: Install it onto your Roku to stream files from your Mezzmo library. Full details at http://www.mezzmo.com/wiki/doku.php?...oku_user_guide
    Wiki: User Guides & Reference Manual at http://www.mezzmo.com/wiki
    Facebook: http://www.facebook.com/Mezzmo.DLNA.Server
    Twitter: https://twitter.com/conceiva_mezzmo
    Web: http://www.mezzmo.com

  3. #3
    Join Date
    Feb 2014
    Posts
    84

    Default

    Doesn't matter anymore. Found out mezzmo has a temp folder with automatic extract all subtitles..

    So I'll just keep all subs INSIDE the mkv container from now on and let mezzmo handle the temp for the externals..

    all modern devices either support internal or external..

    so mezzmo pretty much covers all modern hardware and that's fine for me this way.

    No need for transcoding then.

Similar Threads

  1. Web Streaming Feature Request
    By ftanner in forum Mezzmo Wish List and Feedback
    Replies: 2
    Last Post: 02-06-2017, 11:22 AM
  2. Feature Request.
    By aika0116 in forum Mezzmo Questions and Support
    Replies: 1
    Last Post: 04-13-2015, 08:36 AM
  3. New Feature Request
    By ftanner in forum Mezzmo Wish List and Feedback
    Replies: 1
    Last Post: 04-10-2012, 09:55 AM
  4. Feature request: Virtual Directories
    By xcom923 in forum Mezzmo Wish List and Feedback
    Replies: 6
    Last Post: 11-09-2011, 09:07 AM
  5. Rapidshare and proxy feature request
    By pitstopped in forum DownloadStudio Wish List and Feedback
    Replies: 4
    Last Post: 12-13-2008, 03:12 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •