I think that I have a problem with the transcoding

[huvince]

I have a problem with the HD video which need the transcoding. If the video is less than HD ready no problem
I think that it is a transcoding problem because if I recode the video in mpeg2 (720P or 1080P) and I use it with Mezzmo without transcoding, the problems are not.

Problem 1 with the HD ready video:

Extension : .mks
Taille : 4 696 233 422 Bytes
LxH : 1280x528 pixel
Durée : 1h48m55s
Format : Matroska file format
Codec video : H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10
Codec audio : ATSC A/52 / AC-3
Bit rate : 640000 bits/sec
48000 Hz

1. If I use the default parameter ", the broadcast video format is 4:3 and not 2:35. Thus the format is not respected. Same if I change the format with the TV, at best, I get a 16:9 format

1. If I use the parameter : "Always delivery" in "Deliver all possible formats for media file to the device", the broadcast video format is correct 2:35. But the broadcast video stops after ± 1m10sec, the sign "pause" appears on TV without manipulation. And during the playback, the video jerk because my CPU is too small.

Problem 2 wuth the full HD Video:

Extension : .mks
Taille : 7 034 131 912 Bytes
LxH : 1920x816 pixel
Durée : 1h33m44s
Format : Matroska file format
Codec video : H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10
Codec audio : DCA (DTS Coherent Acoustics)
Bit rate : 1536000 bits/sec
48000 Hz

1. If I use the default parameter, For this, I use the default parameter, the broadcast video format is correct 2:35. But the broadcast video stops after ± 1m30sec, the sign "pause" appears on TV without manipulation.

Thanks per advance to your guidance
And sorry for my english

Best regards