hello,
i have 2 test files and 2 devices. none of them seems to work correctly with Mezzmo.
Panasonic G20:
file1: file1 is working perfectly on my TV. It is using transcoding. Image is smooth and guality is good. It is using 5.1 audio(my tv is showing 5.1, but my home cinema system is showing only 2.1, but all 5.1 speakers are playing - this could be caused by inability to pass through 5.1 audio from almost all feeds to optical audio out)
Code:
ffmpeg version N-33781-g35674a2, Copyright (c) 2000-2011 the FFmpeg developers
built on Oct 19 2011 10:31:16 with gcc 4.6.1
configuration: --enable-memalign-hack --arch=x86 --target-os=mingw32 --cross-prefix=i686-w64-mingw32- --enable-static --disable-shared --enable-zlib --disable-postproc --prefix=/media/ffmpeg --enable-libmp3lame --enable-libx264 --enable-gpl --extra-libs='-lx264 -lpthread' --enable-runtime-cpudetect --extra-cflags=-I/home/dennis/cc/include --extra-ldflags=-L/home/dennis/cc/lib --pkg-config=pkg-config
libavutil 51. 22. 0 / 51. 22. 0
libavcodec 53. 21. 0 / 53. 21. 0
libavformat 53. 16. 1 / 53. 16. 1
libavdevice 53. 4. 0 / 53. 4. 0
libavfilter 2. 44. 0 / 2. 44. 0
libswscale 2. 1. 0 / 2. 1. 0
Seems stream 0 codec frame rate differs from container frame rate: 47.95 (20000000/417083) -> 23.98 (24000/1001)
Input #0, matroska,webm, from
Duration: 01:46:01.35, start: 0.000000, bitrate: 7345 kb/s
Stream #0:0(eng): Video: h264 (High), yuv420p, 1280x690, SAR 1:1 DAR 128:69, 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc
Metadata:
Stream #0:1(eng): Audio: dts (DTS), 48000 Hz, 5.1(side), s16, 1536 kb/s (default)
Metadata:
At least one output file must be specified
---> DB Level Info: 41, 100
---> Frame rate: 23,98
---> Aspect ratio: 128:69
File2:
file2 on PanaG20 - giving me error: file not supported
Code:
ffmpeg version N-33781-g35674a2, Copyright (c) 2000-2011 the FFmpeg developers
built on Oct 19 2011 10:31:16 with gcc 4.6.1
configuration: --enable-memalign-hack --arch=x86 --target-os=mingw32 --cross-prefix=i686-w64-mingw32- --enable-static --disable-shared --enable-zlib --disable-postproc --prefix=/media/ffmpeg --enable-libmp3lame --enable-libx264 --enable-gpl --extra-libs='-lx264 -lpthread' --enable-runtime-cpudetect --extra-cflags=-I/home/dennis/cc/include --extra-ldflags=-L/home/dennis/cc/lib --pkg-config=pkg-config
libavutil 51. 22. 0 / 51. 22. 0
libavcodec 53. 21. 0 / 53. 21. 0
libavformat 53. 16. 1 / 53. 16. 1
libavdevice 53. 4. 0 / 53. 4. 0
libavfilter 2. 44. 0 / 2. 44. 0
libswscale 2. 1. 0 / 2. 1. 0
Input #0, matroska,webm, from
Duration: 00:45:21.72, start: 0.000000, bitrate: 6900 kb/s
Stream #0:0(eng): Video: h264 (High), yuv420p, 1280x720, SAR 1:1 DAR 16:9, 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc (default)
Stream #0:1(eng): Audio: ac3, 48000 Hz, 5.1(side), s16, 640 kb/s (default)
Stream #0:2(eng): Subtitle: text
At least one output file must be specified
---> DB Level Info: 41, 100
---> Frame rate: 23,98
---> Aspect ratio: 16:9
LG HX806PE bluray 5.1 home cinema
File1 (same as file1 above)
video in unwatchable. choppy in almost every faster scene. LG should support mkv and h264 via DLNA, so transcoding is not used for this file.
i tried to force transcoding(to lower quality and enhance fps) by setting my media device "Deliver media files supported by device:" option to "never deliver". after this was set, transcoding was still not used. i checked "transcoding settings" -> "folder size" which remains 0.00GB while the movie is playing.
audio seems to be only 2.1 - at least that is the information on my home cinema device.(all 5.1 speakers are active)
File2(same as file2 above)
this file is perfect. even fast and action scenes are smooth.
as above, my device is saying that only 2.1 audio is used (all 5.1 speakers are active)
One additional problem was that by default Mezzmo detected my LG system as "Marantz BDP". i tried it using this setting and also LG bluray and LG bluray LPCM. no luck fixing all problems with any setting.
Bookmarks