Panasonic Viera (2011) issues

[Pootle]

Hi

My WHS2011 box has been in storage for a few months while house renovations have been going on. Before this, everything was working fine - now I am back online again tonight for the first time, have upgraded to 3.1.1.0 and films that were playing perfectly well before are now stuttering, and I am getting a transcoding rate of about 17fpsor less.

I am confused as to why this is happening as nothing has changed - same server, same TV - Panasonic TX-L37DT30 (with same device profile - Viera 2011 models), same wired network/router etc, same m2ts files....only thing I am aware of that has changed is the version of Mezzmo I am using (I think it was 2.7.x previously)

Any suggestions (or a new version of that particluar profile) gratefully recieved

Thanks

EDIT - I've just emailed the logs to you...and the FFmpeg data for one of the films that used to work is below.

I've also had Mezzmo crash on me a few times tonight - those logs have also been emailed.



ffmpeg version N-50460-g393dcbf Copyright (c) 2000-2013 the FFmpeg developers
built on Mar 4 2013 17:38:17 with gcc 4.6.2 (GCC)
configuration: --enable-memalign-hack --arch=x86 --target-os=mingw32 --cross-prefix=i686-w64-mingw32- --enable-static --disable-shared --enable-zlib --disable-postproc --prefix=/home/peter/ffmpeg/build/gpl --enable-libmp3lame --enable-libx264 --enable-gpl --extra-libs='-lx264 -lpthread' --enable-runtime-cpudetect --extra-cflags=-I/home/peter/cc/include --extra-ldflags=-L/home/peter/cc/lib --pkg-config=pkg-config --disable-w32threads --enable-zlib
libavutil 52. 17.103 / 52. 17.103
libavcodec 54. 92.100 / 54. 92.100
libavformat 54. 63.102 / 54. 63.102
libavdevice 54. 3.103 / 54. 3.103
libavfilter 3. 41.100 / 3. 41.100
libswscale 2. 2.100 / 2. 2.100
libswresample 0. 17.102 / 0. 17.102
[mpegts @ 0003e4a0] max_analyze_duration 60000000 reached at 60006300 microseconds
Input #0, mpegts, from 'G:\ServerFolders\Videos\Avatar.m2ts':
Duration: 02:41:41.70, start: 1.991000, bitrate: 34807 kb/s
Program 1
Stream #0:0[0x1011]: Video: h264 (High) (HDMV / 0x564D4448), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 90k tbn, 47.95 tbc
Stream #0:1[0x1100]: Audio: dts (DTS-HD MA) ([134][0][0][0] / 0x0086), 48000 Hz, 5.1(side), fltp, 1536 kb/s
Stream #0:2[0x1200]: Subtitle: hdmv_pgs_subtitle ([144][0][0][0] / 0x0090)
At least one output file must be specified

<MEZZMO>: Child process ended with code: 109, ExitCode=1


---> DB Level Info: 41, 100
---> Frame rate: 23.98
---> Aspect ratio: 16:9

[Paul]

Thanks, Pootle. We'll check it out and respond back to you via email after we have analysed your logs.

[Pootle]

Hi - email sent but it bounced back as undelivered (support [at] conceiva [dot] com)

Is this still the correct address?

[Paul]

That's the correct email address. Strange - we've received many support emails (with attachments) over the past few days. If the zip file is larger than 10MB, then the email may bounce - in this case, please upload it to a filesharing site like mega.co.nz, dropbox or rapidshare.

[Pootle]

That would explain it - the 3 zipped logs containing the crash reports were about 10MB in total. I'll resend agan but only include the 2 most recent logs

[Paul]

Thanks, Pootle. Or, you can send each ZIP in separate emails.

[StuR]

I too am seeing some streaming problems (stuttering) with the latest version that didn't happen before. Restarting the meezmo service helped.
Imho, 3.1.1.0 needs some work.

[Paul]

We are preparing a minor update at the moment and this contains fixes for issues reported to us and some improvements. It should be released in the next week.

If you get this stuttering issue again, then we'd like to see a set of logs so we can find out what is causing the problem. Turn on logging (see http://forum.conceiva.com/showthread...nostic-logging) and restart your Mezzmo server. Reproduce the stuttering problem and, when it occurs, stop your Mezzmo server and exit Mezzmo. Zip up all the logs and email them to us at support [at] conceiva [dot] com.